Operation Manual

BoomBoom 230 5
ENGLISH
PAIRING BLUETOOTH DEVICES (ONE-OFF)
The BoomBoom 230 is able to remember up to 8 paired devices. As a result it is
not necessary to pair a device every time you connect it. If a 9
th
device is paired
with the BoomBoom 230, the device which has been originally paired with the
BoomBoom 230 will be deleted from its memory.
1. Connect the AC Power Adaptor plug to the DC INPUT [5] located on the
rear panel of the BoomBoom 230.
2. Connect the AC Power Supply Unit into a suitable wall outlet.
3. Set the ON/OFF switch [4] to the ON position.
4. The LED status [3] will light up and stay on, indicating that the
BoomBoom 230 is switched on.
5. Press and hold the CONNECT [3] button for 3 seconds to put the
BoomBoom 230 into connection mode. Release the CONNECT button
once you hear 2 short beeps. The LED status will now blink rapidly.
6. Turn on a device that supports Bluetooth, such as an iPod, iPhone,
Android or mp3 player and go to: Settings > General > Bluetooth. Click
ON ‘Bluetooth’ and the BoomBoom 230 will appear on the device. Click
ON ‘BoomBoom 230’. The device is now connected and paired with the
speaker. If the device prompts for a pairing code, enter:”0000”
7.
VOLUME CONTROL
1. Tap VOLUME+ to increase the volume. When maximum volume has been
reached, a tone indicator will sound.
2. Tap VOLUME- to decrease the volume. When minimal volume has been
reached, a tone indicator will sound.
3.
TURNING OFF
Set the ON/OFF button to the OFF position in order to turn the BoomBoom
230 off.
To be completely disconnected from the power input, the main plug of the
AC/DC adapter shall be disconnected from the main.