User manual

BOOMBOOM 380
9
ENGLISH
STANDBY
When the distance between the BoomBoom 380 and your Bluetooth
Source Device becomes too far apart, audio will default back to your
Bluetooth Source device. If you come back in range of the BoomBoom
380 within three minutes, audio will switch back to the BoomBoom 380
automatically. If the Bluetooth Source device is out of range for more than
three minutes, the BoomBoom 380 will go into standby mode. When the
Bluetooth Source device comes back in range again, go to the pairing list
on your device and select the BoomBoom 380. The Atmospheric Lighting
of the BoomBoom 380 will start to glow steadily and the connection is
made automatically.
WIRED CONNECTION
This BoomBoom 380 can also be used as a conventional Wired Stereo
Speaker with Direct Line-In to your Panel TV or other Audio Devices
simply by connecting the 3.5mm Audio Cable from the rear of the
BoomBoom 380 to your Music Source.
When the Circuit inside the Speaker detects the Signal from Direct Line-
In, the LED Indicator glows steadily in Green.
Fig.4