User manual

BOOMBOOM 560

ENGLISH

PAIRING BLUETOOTH DEVICES (ONE-

OFF)

The BoomBoom 560 is able to remember up to 8 paired devices. As a

result it is not necessary to pair a device every time you connect it. If a

device is paired with the BoomBoom 560, the device which has

been originally paired with the BoomBoom 560 will be deleted from

its memory.

1. Make sure the BoomBoom 560 is turned off.

2. Press and hold the POWER [5] button for 7 seconds to put the

BoomBoom 560 in pairing mode. Release the POWER button as

soon as you hear two short ‘beep’ tones. The red and blue LED

will flash alternately.

3. Turn on a device that supports Bluetooth, such as an iPod,

iPhone, Android or mp3 player and go to: Settings > General >

Bluetooth. Click ON ‘Bluetooth’ and the BoomBoom 560 will

appear on the device. Click ON ‘BoomBoom 560’. The device is

now connected and paired with the headphone. If the device

prompts for a pairing code, enter:”0000”.

VOLUME CONTROL

1. Tap VOLUME+ [6] to increase the volume. When maximum

volume has been reached, a tone indicator will sound.

2. Tap VOLUME- [7] to decrease the volume. When minimal volume

has been reached, a tone indicator will sound.

3. Press Next [3] or Previous [2] to listen to the next/previous track.

TURNING OFF

Press and hold the power button for 4 seconds to turn off the

BoomBoom 560.

The headphones will turn off automatically after 10 minutes when no

device is connected to it.

The red LED will turn on and then slowly switch off.