Operation Manual

BOOMBOOM 90
7
ENGLISH
AUTOMATIC PAIRING, FOR FIRST USE
The BoomBoom 90 is able to remember up to 8 paired devices. As
a result it is not necessary to pair a device every time you connect
it. If a 9
th
device is paired with the BoomBoom 90, the device which
has been originally paired with the BoomBoom 90 will be deleted
from its memory.
1. Locate your Bluetooth music source in the vicinity of the
BoomBoom 90. The best distance is around 1 metre.
2. Ensure that the BoomBoom 90 is on.
3. The LED starts to blink blue.
4. Switch your device’s Bluetooth function on according to the
instructions of your device and go to Bluetooth settings.
5. Scan for new devices and select the name “Music Receiver”.
6. If the Bluetooth connection process requires a password,
enter “0000”. The BoomBoom 90 then connects with your
device by lighting up a steady blue LED. The connection has
now been made and your device is linked to the BoomBoom
90. You can now play and control the music in your device on
your sound system.
! You can link to up to 8 devices however only 1 device can be
connected to the BoomBoom 90 at one time.
CONNECTING
The BoomBoom 90, depending on the Bluetooth audio source,will
does not always automatically connect to the last device it was
connected to. When connected, the blue LED light will light up .
When not connected, the blue LED light will flash at a slow
rate.Only one device can be connected at the same time to the
BoomBoom 90. Go to the device's Bluetooth settings and select the
“Music Receiver”. A connection will then be made.