INFRA RED INFRA RED MADE EASY A mini guide from Wireless – Wired – IP Network – all under control Powermid making AV happen Contents See inside on page 14 ONLY £23.36 IR Signals Explained 2 Top Tips for IR 2 IR Distribution Systems 3 IRBKIT Mini 4 IR PR04 5 IR Emitter Wands 6 IRâ•‹Anywhere 7-11 HDMI Cables IRâ•‹Commander 12 Optional Accessories See inside on page 10 FROM 13-14 Remote Controls 15 IP Control 16 Information & Advice! £169.
More details on all products can be found online at... IRâ•‹Tip If you are using an IR distribution amplifier it is imperative to make sure that the equipment you are trying to control can only see one source of IR. If the original IR from the remote handset as well as the distributed signal can both find a path to the equipment’s eye then the signal will be garbled and the equipment will not respond. This can occur even if one of the signals is very feint.
www.keene.co.uk IR Distribution Systems –╇ IRBKITS IRBKIT The classic in-cabinet solution that puts your remote back in control and routes IR commands to wherever they are needed. Multiple input/output options (see components list below for more details) can provide a solution to almost any IR control problem. This is central building block and can be added to by connecting extra receivers and emitters as required.
More details on all products can be found online at... IRBKIT Mini IRBKIT Mini The Keene IRBKIT MINI is a very compact IR Distribution Amplifier. It allows you to use your remote control on equipment located in positions where your remote wouldn’t normally work. For example, equipment placed inside cabinets with closing doors or located on shelves behind you or around a corner.
www.keene.co.uk IR PR04 IRPRO4 System The Pro4 IR Distribution amplifier has some powerful features for demanding installations. It has four IR Receiver inputs, and uniquely all four receivers can be located in the same room if needed.
More details on all products can be found online at... IR Emitter Wands Universal Wand The IR Universal wand is for use in low power outputs and can be mounted directly on the equipment fascia or positioned on the shelf. Suitable for most applications and usually supplied as standard with an IRBKIT. Code IRUW 5 £ .99 Dual Output Blinking Wands The single jack plug drives two IR emitter wands.
www.keene.co.uk IR Receivers Standard IR Receiver This receiver covers the 36KHz to 40KHz bandwidth and is compatible with the vast majority of domestic infra red equipment. Also available built into a single gang faceplate 12.99 £ Code IRSR Code IRSP 29.99 £ Wideband IR Receiver This receiver covers the 20KHz to 120KHz bandwidth. Because of the high bandwidth the system will be more prone to interference so we do not recommend unless required by your AV equipment.
IR Distribution IR Over RF Aerial Cable If you’ve used RF aerial cable to run signals to another TV in the house you can use the same cable for IR control. The Keene RF2IR product allows IR control signals to be distributed via conventional aerial coax cable. The IR receiver is the same as that used by the common “sky-eye” type systems although it is not limited to satellite receivers and may be used with almost all IR controllable AV equipment.
www.keene.co.uk IR Anywhere IR over IP – IR Anywhere The IR Anywhere products are capable of sending and receiving IR signals across an IP network; either a LAN or even around the world via the internet.
More details on all products can be found online at... IR Anywhere IR Commander Matrix For the more complex installations we have the IRCM, the most advanced and the most capable IR distribution system Keene Electronics have ever produced! Featuring multiple inputs and multiple outputs it enables you to specify which input should go to which output. This is useful in an installation where there may be say three identical satellite receivers, each sending their signal to a different room.
www.keene.co.uk ...So take a look now IR Anywhere IR Commander Matrix IRLPW (optional) A short range emitter for attachment to the equipment fascia adjacent to the IR window. IRUW IR Universal Wand. Ideal for general purpose use and can be fascia or shelf mounted.
More details on all products can be found online at... HDMI Cables Aavara High Definition HDMI Cables These are top specification Hi-Definition AV Cables fully supporting all of the latest HDMI specifications, including: 3D, 4K, ARC (Audio Return Channel), HEC (HDMI Ethernet Channel). The construction features pure gold 24K plated end shell and connector with a protective braided cable sheath. Specifications: • Works with PS3, XBOX, Blu-Ray/HD/DVD player, Set Top Box • 1.
www.keene.co.uk Optional Accessories IR Receiver Adaptor KRECA Allows Keene IR receivers to be used with other manufacturers IR distribution systems, for example Xantech, Onkyo, Harmon Kardon etc. PCB jumpers allow a number of parameters to be changed including: Data (5v or 12v) and Carrier signal (exclude / include). Supplied complete with a 3.5mm jack to jack 1.2m link cable.
More details on all products can be found online at... Optional Accessories IRâ•‹Tip Other sources of infrared include sunlight, fluorescent lights and LCD and plasma displays. Keene IR receivers are carefully filtered to minimise any interference that might be caused by these sources, but it always makes sense to try and position your IR receivers carefully.
www.keene.co.uk ...So take a look now Remote Controls MARMITEK Easy Icon Universal Remote Control • Guaranteed to work with all your current and any other A/V equipment you purchase in the future (extremely comprehensive pre-programming with learning facility). This is a very clever universal remote from Marmitek. It can control X10 equipment via RF and up to 10 AV devices by infra red control.
More details on all products can be found online at... IPâ•‹Control DemoControl The app gives you a graphical front end with which to access the 128 stored IR codes within the memory locations of a KIRA128, IRCM or KIRARS232. The codes are assigned to three devices (Display, Set-top box & DVD) and the app can be used on iPhone or iPad. The app is available on iTunes for free (search “DemoControl”). A FREE app now available for the iPod and iPad from the iTunes store http://www.demopad.
