Operation Manual

3. Connecting the receiver

Connect the DC power input of the receiver with the supplied large

AC adapter. The use of a surge protector is recommended to protect

the receiver from power surges which may damage the receiver and

connected speakers or may cause audio dropouts.

The receiver connects to regular passive loudspeakers via regular

speaker cables (not included). Observe the correct polarity when

connecting the speakers.

It is also possible to connect both speakers to separate receivers by

using an additional receiver. In this case connect one speaker to the

left audio output of the first receiver and the second speaker to the

right audio output of the second receiver. One audio output of each

receiver will not be used in this case.

1ATTENTION!

Never short circuit any receiver audio output since this may damage

the receiver. A clicking noise may be generated during receiver power

up. Therefore, it is recommended to connect power to the receiver

prior to connecting the speakers.

receiver

DC 24 V

1000 mA

Power outlet

AC adapter

Speakers

DC 24V

SPEAKER OUTPUTS