User manual

ManualsBrandsMarmitek ManualsSwitchSW10

SW10

SHUTTER SWITCH

20144 / 20061012 • SW10

SHUTTER SWITCH

SW10

SHUTTER SWITCH

USER MANUAL 3

GEBRAUCHSANLEITUNG 7

GUIDE UTILISATEUR 11

MODO DE EMPLEO 15

MANUALE D’ISTRUZIONI 19

GEBRUIKSAANWIJZING 23

SW10.qxd 02-11-2006 17:20 Pagina 1

Summary of content (6 pages)

PAGE 1
SW10.
PAGE 2
SW10.
PAGE 3
SW10.qxd 02-11-2006 17:20 Pagina 3 SAFETY WARNINGS • • • • • • • The wiring of your electrical installation is live (230 V) and extremely dangerous. Never connect the module when plugged into the mains. Always turn off the main switch before starting the installation. This product is for professional use and should be installed by a certified installer. To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose the components to rain or moisture.
PAGE 4
SW10.qxd 02-11-2006 17:20 Pagina 4 Marmitek X-10 signals very much depends on the local circumstances. On average the range is a cable length of 80 meters. If you have difficulties with the range of your Marmitek X-10 signals, please pay attention to the following facts: 1. When more than one phase is used for your electrical system, it is necessary to couple these phases for the Marmitek X-10 signals. For coupling you can use FD10 Phase Couplers/Filters.
PAGE 5
02-11-2006 17:20 Pagina 5 My modules will not respond to my controller. Make sure that the House Code on all Modules and Controllers are set to the same House Code (A .. P). My modules will not react to my remote / sensor. When you use a remote or sensor, you should have at least one TM13 Transceiver or Marmitek Security Console installed in your house. These components will translate the radio signals to the Marmitek X-10 signal on the power line.
PAGE 6
SW10.qxd 02-11-2006 17:20 Pagina 6 Technical data Supply voltage: Supply current : Max. load: Signal sensitivity: Input impedance: Connection: Ambient temperature: Dimensions: Overall mechanism dimensions: 230V +10% -15% 50 Hz < 5.