Quickstart Guide English
Introduction Box Contents Gamut PAR H7 Quickstart Guide Power Cable Safety & Warranty Manual Signal Cable Important: Visit marqlighting.com to download the complete User Guide. Support For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit marqlighting.com. For additional product support, visit marqlighting.com/support.
Features Bottom Panel 1. Power In: Use a standard power cable (included) to connect this input to a power outlet. 2. Power Out: Use a standard power cable to connect this output to an additional fixture. This connection will supply power to the additional fixture when this one is connected a power outlet. Please see Setup > Linking > Power for information about linking multiple fixtures. 4 3 2 1 3.
Setup Note: Items not listed under the Introduction > Box Contents are sold separately. Power Information Before connecting the fixture to a power outlet, make sure the power cable is not crimped or damaged. Also, make sure the power outlet’s voltage is within the range stated on this product (on its housing or decal). Before cleaning or replacing the fuse, disconnect Gamut PAR H7 from its power source. Use a screwdriver or other tool to remove the compartment (do not pull it out by the tab only).
Linking When using multiple Gamut PAR H7 fixtures, you can link (“daisy-chain”) them so that each each fixture supplies power and/or sends DMX data to the next one. This helps reduce clutter in your cabling and save you setup time. You do not have to link fixtures for both power and DMX control; you can link them for either purpose independently.
Operation Menu Options To use the menu: • Press Enter to select a menu, setting, or option. • Press Menu to return to the previous menu. • Use the Up and Down buttons to change the currently shown setting or option.
DMX Functions You can control Gamut PAR H7 by linking it to a DMX controller. Please see the complete User Guide at marqlighting.com to learn how to do this. See below for charts of the available functions.
11-Channel Operation (continued) Channel Function 9 Color Presets (continued) 8 Value Description 080–083 C-20: A+UV 084–087 C-21: W+UV 088–091 C-22: R+G+B 092–095 C-23: R+G+A 096–099 C-24: R+G+W 100–103 C-25: R+G+UV 104–107 C-26: R+B+A 108–111 C-27: R+B+W 112–115 C-28: R+B+UV 116–119 C-29: R+A+W 120–123 C-30: R+A+UV 124–127 C-31: R+W+UV 128–131 C-32: G+B+A 132–135 C-33: G+B+W 136–139 C-34: G+B+UV 140–143 C-35: G+W+UV 144–147 C-36: G+A+UV 148–151 C-37: G+W+UV 152–155
11-Channel Operation (continued) Channel Function 9 Color Presets (continued) 10 11 Programs Program Speed Value Description 208–211 C-52: G+B+A+W 212–215 C-53: G+B+A+UV 216–219 C-54: G+B+W+UV 220–223 C-55: G+A+W+UV 224–227 C-56: B+A+W+UV 228–231 C-57: R+G+B+A+W 232–235 C-58: R+G+B+A+UV 236–239 C-59: R+G+B+W+UV 240–243 C-60: R+G+A+W+UV 244–247 C-61: R+B+A+W+UV 248–251 C-62: G+B+A+W+UV 252–255 C-63: R+G+B+A+W+UV 000–015 Off (no function) 016–035 Snap 1: R G B W 036–0
8-Channel Operation Channel Function Value Description 1 Dimmer 000–255 Master dimmer, all colors, dark (000) to bright (255) 2 Red Dimmer 000–255 Red linear dimmer, dark (000) to bright (255) 3 Green Dimmer 000–255 Green linear dimmer, dark (000) to bright (255) 4 Blue Dimmer 000–255 Blue linear dimmer, dark (000) to bright (255) 5 Amber Dimmer 000–255 Amber linear dimmer, dark (000) to bright (255) 6 White Dimmer 000–255 White linear dimmer, dark (000) to bright (255) 7 Ultravi
Technical Specifications Specifications are subject to change without notice. Light DMX Type 7 LEDs, 10 W each, 6-color (red, green, blue, white, amber, UV) Power 100 W Internal Temperature 32–104 °F / 0–40 °C Wavelength (UV) 395–405nm Illuminance 1150 lux @ 3 m Strobe Rate 0.7 t/s (0.7 Hz) – 15 t/s (15 Hz) Beam Angle 25° Field Angle 39.
marqlighting.com Manual Version 1.
