Quickstart Guide English
Introduction Box Contents Gesture Beam 400 Quickstart Guide Power Cable Safety & Warranty Manual DMX Cable Important: Visit marqlighting.com to download the complete User Guide. Support For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit marqlighting.com. For additional product support, visit marqlighting.com/support.
Features Rear Panel 1. Power In: Use a standard power cable (included) to connect this input to a power outlet. 2. Fuse: This compartment holds the fuse. Before cleaning or replacing the fuse, disconnect Gesture Beam 400 from its power source. Use a screwdriver or other tool to remove the compartment (do not pull it out by the tab only). Replace the fuse only with a new fuse with the same rating (250 V, 4 A). 1 2 3 4 5 6 3.
Setup Note: Items not listed under the Introduction > Box Contents are sold separately. Power Information Before connecting the fixture to a power outlet, make sure the power cable is not crimped or damaged. Also, make sure the power outlet’s voltage is within the range stated on this product (on its housing or decal). Before cleaning or replacing the fuse, disconnect Gesture Beam 400 from its power source. Use a screwdriver or other tool to remove the compartment (do not pull it out by the tab only).
Linking When using multiple Gesture Beam 400 fixtures, you can link (“daisy-chain”) them so that each each fixture supplies power and/or sends DMX data to the next one. This helps reduce clutter in your cabling and save you setup time. You do not have to link fixtures for both power and DMX control; you can link them for either purpose independently.
Operation Menu Options Menu Submenu Settings/Values Description DMX Function DMX Address 001–512 DMX address setting Channel Mode 15Ch 15-channel operation 8Ch 8-channel operation No DMX Signal Keep When no DMX signal, do nothing (hold) Auto When no DMX signal, enter Run Mode Clear DMX Monitor Run Mode Auto Movement Sound Active Manual Test When no DMX signal, black out View values received on DMX channels See Description DMX, Sound, Random, 8 auto movement programs On, Off Sound acti
Menu Options (continued) Display Settings Inverse Invert control panel’s display Auto-Off On, Off Automatically turn off display when not in use Fixture Information Firmware Currently installed firmware version Total Use Hours Total running time (HHHHH:MM) Current Use Hours Current use running time (HHHHH:MM) Offset Calibration Pan Calibration -128 – +127 Offset for pan value Tilt Calibration -128 – +127 Offset for tilt value Color Calibration -128 – +127 Offset for color value Gob
15-Channel Operation (continued) Channel Function 8 Color Wheel Value Description 000–006 White 007–013 Red 014–020 Orange 021–027 Green 028–034 Light Blue 035–041 Purple 042–048 Yellow 049–055 Blue 056–063 Pink 064–127 Color indexing 128–189 Clockwise, fast (128) to slow (189) 190–193 Stop 194–255 Counterclockwise, slow (194) to fast (255) 9 Gobo Wheel 000–007 Open/white 008–015 Gobo 1 See Technical Specifications > 016–023 Gobos to view gobo patterns.
15-Channel Operation (continued) Channel Function 13 14 15 Prism Rotation Macro Functions Control Functions Value Description 000–127 Indexed position, 0° (000) to 360° (127) 128–189 Counterclockwise prism rotation, fast (128) to slow (189) 190–193 Stop at current position 194–255 Clockwise prism rotation, slow (194) to fast (255) 000–007 No function 008–023 Automatic movement 1 024–039 Automatic movement 2 040–055 Automatic movement 3 056–071 Automatic movement 4 072–087 Automati
8-Channel Operation Channel Function Value Description 1 Pan 000–255 Pan angle, 0° (000) to 540° (255) 2 Tilt 000–255 Tilt angle, 0° (000) to 270° (255) 3 Shutter 000–003 Closed 004–007 Open 008–076 Strobe, slow (008) to fast (076) 077–145 Pulse, slow (077) to fast (145) 146–215 Random strobe, slow (146) to fast (215) 216–255 Open 000–006 White 007–013 Red 014–020 Orange 021–027 Green 028–034 Light Blue 035–041 Purple 042–048 Yellow 049–055 Blue 056–063 Pink 4 Col
8-Channel Operation (continued) Channel Function Value Description 5 Gobo Wheel 000–007 Open/white 008–015 Gobo 1 See Technical Specifications > Gobos to view gobo patterns.
Technical Specifications Specifications are subject to change without notice. Light DMX Power Physical / Mechanical Type LED Power 75 W Colors 8 + white, split colors, scrolling Gobos 8 + open, gobo shake & scrolling 0.93” (23.5 mm) outside 0.75” (19 mm) image 0.04” (1.1 mm) max thickness Illuminance 81,400 lux @ 3 m (9.8 ft.
Lumen Output Lumens: 96400 81400 33200 5° Distance (m): 0 (ft.): 0 Diameter (cm): 0 (in.): 0 1 3 5 3.3 9.8 16.4 8 18 30 3.1 7.1 11.
marqlighting.com Manual Version 1.
