Operation Manual

MIXER FUNCTION
1. INPUT FADER
Controls indivdual source levels for CH1-2 in the mix
2. LED METER
Indicates the master output level
3. INPUT TOGGLE SWITCH
Selects which source will be live to that channel bass on what you have connected to the rear panel
input section. In CD1-2 position the internal CD units are active
4. CUE FOR CH1-2
Selects which source will be live to that channel for CH1 &CH2
5. CH1&CH2 GAIN CONTROL
Adjusts CH1&CH2 level
6. CUE LEVEL CONTROL
Adjusts cue volume
7. DJ MIC
Adjust microphone level
8. HIGH FADER 1-2
Adjust CH1&CH2 equalization of high
9. MID FADER 1-2
Adjust CH1&CH2 equalization of mid
10. LOW FADER 1-2
Adjust CH1&CH2 equalization of low
11. FADER START
Activation allows you to start the CD players from you crossfader. Travel from left to right will start the
right CD player and pause the left CD player.
12. MASTER LEVEL
Adjust master level output.
13. REPLACEABLE CROSSFADER
Achieves clean segues between the two input channels. Hard left selects channel 1.Hard right selects
channel 2. With the crossfader centered, both assigned channels are live. Use the crossfader for fast
and seamless segues from one selected channel to the other.