Operation Manual

RER PANEL FUNCTION
1. POWER BUTTON
Press the power switch to turn the unit on. To switch the power off press the power switch again.
2. AC CORD
Use this cable to connect the AC mains power to the unit.
3. POWER SUPPLY
Use this selector to choose the good Power supply. (Several countries have another power supply)
4. USB
Connect to the USB.
5. VIDEO OUTPUT
The video for each CD player is an output for these jacks. Connect to the line input of the mixer
6. GND
Grounding lug for turntable connection. Always use this connection when using turntables.(Your
turntable cable should have a grounding wire)
7. LINE/PHONO INPUT SWITCH
Use this to allow either line level or phono level equipment to be plugged into your channel inputs.
When phono input is selected, your signal is fed directly to the high-quality RIAA phono preamplifiers.
Line level sources will verload the sensitive phono pre-amps and will sound very bad, so always be
sure to toggle the line/phono switch over to line before connection of line sources.
8. INPUT
Plug in the line level device such as tape deck or additional CD player here.
9. STEREO MAIN OUTPUT
Unbalanced RCA connectors controlled by the master fader.
10. MIC INPUT
11. FUSE