Operation Manual

1. POWER BUTTON
Press the power switch to turn the unit on. To switch the power off press the power
switch again.
2. AC CORD
Use this cable to connect the AC mains power to the unit.
3. USB OF IPOD
Connect to the USB for IPDO.
4. VIDEO OUTPUT
The video for each CD player is an output for these jacks. Connect to the line input of the mixer
5. USB
Connect to the USB.
6. LINE/PHONO INPUT SWITCH
Use this to allow either line level or phono level equipment to be plugged into your channel inputs.
When phono input is selected, your signal is fed directly to the high-quality RIAA phono
preamplifiers. Line level sources will overload the sensitive phono pre-amps and will sound very
bad, so always be sure to toggle the line/phono switch over to line before connection of line sources.
7. GND
Grounding lug for turntable connection. Always use this connection when using turntables. (Your
turntable cable should have a grounding wire)
8. AUDIO OUT
The audio for each CD player is an output for these jacks. Connect to the line input of the mixer.