Operation Manual

GB
First place the operating panel
in position on the right-hand side
and then lock it into place on
the left.
Connection
Connect the device as shown in the diagram.
Note:
• Do not attach the removable control panel until after connection of the cables.
• Please use loudspeakers with an impedance of 4 ohm.
Important Information for installing your carradio!
1. The screws (h) of the transport locking device should be removed before
installation, as otherwise the CD cannot be inserted.
2. The device is designed for the minus pole of the battery, which must be con-
nected to the body of the vehicle. Please check this before installation.
3. When installing/connecting your device please note that not every vehicle is
equipped with an “ISO connection“. In this case we recommend the use of an
ISO adapter specifi cally designed for your vehicle.
Antenna connection
Constant current
connection
Earth
Ignition
Automatic antenna (Blue)
Loudspeaker,
front left
rear left
Fuse/fi lter
box
1A & 10 A
fuses
Yellow
Black
Red
White
White/black
Green
Green/black
Grey
Grey/black
Violet
Violet/black
Loudspeaker,
front right
rear right
Red R
White L
RCA output
ISO connection
E3