Operation Manual

CONNECTING SPEAKERS
Connect the speakers to the red and black terminals on the back of the unit as shown. Use the R-
terminals for the right speaker and L-terminals for the left speaker. Flip down red or black
terminal flap; insert the speaker wire and release flap to lock the wire in place.
MAINS CONNECTION
Make sure that all the components and speakers are correctly connected.
Check that the rated voltage of your units matches the voltage of your power supply (230V-240VAC~50Hz)
Plug the AC Plug into the AC outlet.
HEADPHONES
Be sure that your headphones have a 3.5mm stereo plug with an impedance of 8-32 Ohms. When the headphones are
connected the speakers will automatically mute.
LISTENING TO THE RADIO
Press the power button to switch on the unit.
Set the function selector to the RADIO position.
Select the wave band (AM, FM or FM ST) by using the BAND selector.
Tune in your desired radio station by turning the Tuning knob.
Switch off by setting the function switch to the CD position or pressing the power button
NOTE: for best FM radio reception, extend out the Fm antenna cord. For AM reception, a built in ferrite antenna receives
the signals. Adjust the reception quality by turning the entire unit.
When the FM stereo signals are too weak or there is too much background noise it is better to switch the band selector to
FM (mono) position.
PLAYING A COMPACT DISC
Set the function selector to CD.
Press the CD-open button, place a disc in the centre with the label side up and close the CD door gently.
The total number of tracks available will be shown in the display
Pressing the PLAY button after inserting a CD will start the first track playing.
To pause the track, press the PLAY / PAUSE button while the track is playing. To return to normal playback press the
PLAY / PAUSE button once more.
To stop the CD playing press the STOP button
SELECTING A DESIRED TRACK IN STOP MODE
Press SKIP / SEARCH Up or Down until the desired track number appears on the LCD display.
Press PLAY / PAUSE to begin playing that selected track. The selected track number will appear on the LCD display.
You can skip forward to another track by pressing the SKIP Up button. The tracks will skip forward once each time the
button SKIP button is pressed.
Pressing the SKIP Down button while in play mode will return you to the beginning of the track being played. Pressing
the button more than once will skip down a track each time it is pressed.
GB-3