Operation Manual

LISTENING TO A TAPE
GENERAL OPERATION
STOP / EJECT key Press to stop all deck operations, press again to open the cassette door
FAST FORWARD key Press to start fast forwarding the tape at high speed, press the STOP key when the tape
has reached the end or the desired location.
FAST REWIND key Press to start fast rewinding the tape at high speed, press the STOP key when the tape
has reached the end or the desired location.
PLAY key Press to start playing the tape
PAUSE key Press to pause tape playback, press again to resume normal operation
RECORD key Press RECORD & PLAY together to start recording to the tape
PLAYBACK
 Set the FUNCTION to the TAPE position
 Press the STOP / EJECT button to open the cassette door and insert a cassette. Ensure the cassette is inserted the correct
way, close the cassette deck door gently
 Press the PLAY key to begin playback of the tape
 Adjust the volume to your desired level
 Use the PAUSE key to temporarily stop playback of the tape, press again to resume normal tape operation
 Press the STOP / EJECT button to stop tape playback, press again to eject the cassette.
RECORDING TO TAPE
RECORDING FROM RADIO
 Set the FUNCTION to Tuner mode
 Tune in the radio station that you wish to record from
 Open the cassette door and insert a cassette suitable for recording
 To begin recording press the RECORD and PLAY keys at the same time
 Press the STOP / EJECT button to stop recording
RECORDING FROM CD
 Set the FUNCTION to CD
 Open the cassette door and insert a cassette suitable for recording
 Press the PAUSE key then the RECORD and PLAY keys at the same time. The recording function is now on standby
 Activate the CD player by pressing the CD PLAY button
 Release the PAUSE button on the tape to start recording
 To stop recording, first press STOP on the CD, then press the STOP / EJECT key on the tape deck.
USB FUNCTION
 Set the function selector to CD/MP3/USB mode
 Press the Play/Pause/USB Mode button and hold a few second
 Insert the USB to USB socket
 Then the display will show the total number of track for the USB.
 Press play to start to play the song from USB
TECHNICAL SPECIFICATION
• Power supply: AC 230V-240V 50Hz
• Receiving Bands: AM, FM (stereo)
• Tuning Range: FM 88 – 108 MHz
AM 540 – 1600 KHz
• Speaker: 4 Ohm 5W x 2
• Output Power: 2 x 2W RMS @ 10% THD
• Headphone Impedance: 32 Ohm
GB-4