Operation Manual

RPT V-OUT
21
17
19
20
MUTE MODE
VOL-VOL- VOL+VOL+
ON/OFF
11
13
14
15
16
12
18
MENU
1 iPad/iPhone/iPod dock connector
2 USB port
3 Button
Press this button once to return to
the beginning of current track or
previous track.
Press and hold this button to aujust
volume level down.
4 button play pause ON OFF
5 Button
Press the button once to advance to
the next track.
Press and hold this button to adjust
volume level up.
6 IR receiver for remote control
7 Power on Indicator
(/ //)
8 RCA Video out Jack
9 AUX IN connectors 3.5 mm stereo jack
10 DC 12V Jack
11 button (power ON/OFF)
12 button ( play/pause)
13 MUTE button
14 buttons
15 RPT (repeat) button
16 VOL+/- buttons (increase/decrease volume)
17 MODE button(select source)
18 OK(enter) button
19 buttons (next / previous track)
20
21 MENU button
()
V-OUT ON/OFF button
IN iPod/iPhone/iPad mode:
Toggles the video output on and off.
REMOTE CONTROL
Connect 3.5 mm stereo adio cable (included) to an
external audio source. If required, use a suitable
adapter (not included).
Press the MODE button repeatedly until the power on indicator
changed to flashing Green to enter the AUX mode.
the unit: hardwired, wireless via Bluetooth,iPod(iPhone/iPad)
via the iPod dock, or via the USB port.
Insert the power plug into a convenient Ac wall outlet
Insert 1pc CR2032 button type battery Pay attention to
the correct polarity (see bottom of battery compartment)!
.
battery. For proper
MUTE
Power on
Indicator
How to change the play mode
Press the MODE Button during power on, the play mode
will be changed cyclically from iPad/iPhone/iPod playback
mode to Bluetooth mode, USB mode, and then to AUX-IN
mode, meanwhile, the Power on indicator light color will
be changed from Green (iPad / iPhone / iPod playback
mode) , Blue (Bluetooth mode), Purple (USB mode), and
then to flashing Green (AUX mode)
Note: During USB mode or AUX mode, if you dock your
iPad, iPod or iPhone on the unit, the play mode will
automatically change to iPad/iPhone/iPod playback mode.
English
3
English
4