Operation Manual

10
MQ Systems
Press the MODE button repeatedly, until the power on indicator
changed to blue to enter the Bluetooth mode.The blue color
indicator flashes to show that the unit is in pariring mode.
and the blue color indicator stops flashing
Press the MODE button repeatedly until the power on indicator
changed to Purple to enter the USB mode.
WORKING WITH AN iPad / iPhone / iPod
CHARGING Y OUR iPad / iPhone / iPod
Even if the main unit is in standby mode, once your iPad ,
iPhone, iPod touch or iPod nano is docked onto the
Docking Connector , the charging will start automatically
until the battery is full.
LISTENING T O MUSIC ON YOUR iPad / iPhone / iPod
1. Press the Pow er on Button on the Remote control or
Play/pause button on main unit to turn the unit.
2. P r ess MODE Button repeatedly until the power on
indicator changed to green to enter the iP od/iPhone
/iPad playback mode.
3. Dock your iPad, iPod or iPhone through the iPod dock
connector.
volume is controlled by the unit setting and
not by iPod volume level.
Make sure that your iPad, iPod, iPhone is securely docked
into system. Failur e to do so may cause damage to your
device.
Press “PLAY/PAUSE”button to start the music or
pause the current track.
Press“Vol +”/“Vol – ”button on remote control or press
and hold the “ + ”/ “ - ”button on the main unit or to
raise/lower the volume level Press“ ”button to skip to
next track or press“ ”button to the previous track.
Press and hold“ ”or“ ”button on remote control
to search during the desired music.
To remove your iPod/iPhone, simply stop the playback
and gently unplug it from the dock connector
Note:
The output
1. Dock your Apple device carefully and securely onto the
Flexible Docking Connector .
2. T ap the Power Button on the remote or the Play/Pause
Button on the main unit to turn on the unit. The red
Pow er/Mode Indicator will turn blue. Use the Mode
Button on the remote to switch the main unit back to
iPod mode if the Pow er/Mode Indicator is flashing blue.
3. Access the “Videos ” function of your Apple device and
select the video clip you want to play. It will be played
back on the LCD screen of your Apple device.
4. F or the iPad, iPhone and iPod touch, you can
additionally watch your favorite Youtube videos when
you are connected to the internet via Wi-F i, GSM 2G/3G
or CDMA mobile data networks. Note: Videos will play
properly on the screen when using an iPad, iP ad 2 and
iPod nano 3rd generation when in the vertical position.
Videos may play back on the screen rotat ed 90 degrees
for all other supported iPhone or iPod models.
5. High quality 2.1 channel audio output from your videos
will be played back through the built-in stereo speakers
and subwoofer.
6. After selecting the video you wish to view and it starts
playing, tap the Play/Pause Button of the remote or
the main unit to pause or play.
7. Pr ess the Button on the remote or the main unit to
advance to end of current clip and return to previous
menu.Pr ess and hold the Button on the remote only
during playback for fast forward search within the clip.
8. Press the Button on the remote or the main unit to
return to the beginning of current clip. Press and hold
the Button on the remote only during playback for
fast backward search within the clip.
9. Press the Volume Up (+) and V olume Down (-) on the
remote to adjust the volume output level.
10. Pr ess and hold the and Butt ons on the main
unit will also increase and decrease the volume output
level.
11. If you want to repeat a video clip, press the Repeat
Button on the remote once. T o cancel repeat, press the
Repeat Button two more times. However, there is no
corresponding repeat icon on your Apple device screen
in video mode to show the repeat status.
12. Press the Mute Button on the remote to cut off the
audio output from the speakers momentarily. Press
again to resume listening.
Note:
- Do not press the Play/Pause Button before a video is
playing, otherwise it will resume playback of the last
song being played from the iPod music library instead.
- T he search functions of the and Buttons only
work for videos saved in your Apple device. Streaming
Youtube videos are not supported.
- If you play back a series of Podcast videos under the
same folder or camera rolls under the same date,
pressing the on the remote will skip forward to the
next video until the last one is reached. Pressing the
Button will skip backward to the previous video until the
first one is reached.
- If you are playing self-complied videos and used a 3
party video conversion program, executing the skip
forward/backward, Menu and Up/down functions may
cause the video to start play back from the beginning of
the video instead of where it left off, this is normal.
Videos and podcasts do wnloaded directly from the
Apple iTunes Store will function normally.
HOW TOW AT CHVIDEOS ON YOUR iPad / iPhone / iPod
nano SCREEN
rd
English
5
English
6