Datasheet

ManualsBrandsMARQUARDT ManualsPush Actuated Switches & ButtonsMicroswitch 250 Vac 6 A 1 x On/(On) momentary 1 pc(s)

198

SENSORS MICRO-SIGNAL SWITCHES TACT AND KEY SWITCHES POWER TOOL SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHESSNAP-ACTION SWITCHES ROCKER SWITCHES

Design DIN 41635 A

Mechanical life endurance 10E6 standard version

5E6 version with lever or contact spacing > 3 mm

5E4 version with curved spring steel lever

Contact resistance (new condition) < 100 mOhm (1 A 12 V DC)

Insulation resistance (new condition) > 100 MOhm (500 V DC)

Voltage strength at 250 V 1 500 V function insulation / basic insulation

3 000 V reinforced insulation (depending on installation

situation)

500 V small contact distance

Proof tracking 250 PTI

Insulation spacing acc. to EN 61058 for reinforced or double insulation

Ambient temperature -40 °C ... +100 °C on request ... +125 °C ... +85 °C

Flammability UL 94 (housing: V-0, actuator: V-2)

UL 94 V-2

Heat and ﬁ re resistance 850 °C (category D)

Material actuator

additional actuator

housing

connections

galvanized steel / spring steel / stainless steel

Duroplast type 182 / PA glass ﬁ ber-reinforced

silver-plated / chromated

Bounce time < 10 ms

Approval marks

3 / 1 / 2

Suitable for appliances of protection class II under compliance with the installation conditions

required on the equipment side

ON REQUEST

Material conformant with the ﬁ lament wire test

acc. to IEC 60335-1:2001 chap. 30

Side terminal outlet



PRODUCT FEATURES

Friction contact system the shearing movement of

which can loosen weldings

Very high inrush currents (capacitive)

Contact distances less and greater than 3 mm

Switching forces from 0.2 to 4.2 N



SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES

TO 21 (8) A 250 V AC

Summary of content (7 pages)

PAGE 1
SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES ROCKER SWITCHES TO 21 ( 8 ) A 250 V AC PRODUCT FE ATURES ON REQUEST Friction contact system the shearing movement of which can loosen weldings Material conformant with the filament wire test acc. to IEC 60335-1:2001 chap.
PAGE 2
Stock version 13.4 16 z Ag Ag Ag Ag Ag Ag Ag Ag Ag Ag Ag Ag Ag <3 <3 >1 <3 <3 >3 >3 >3 >3 >3 <3 >3 >3 POWER TOOL SWITCHES 14.7 + 0.5 2.4 - 3.8 14.7 + 0.5 2.4 - 3.8 14.7 + 0.5 0.8 - 1.8 14.7 + 0.5 1.5 - 2.5 14.7 + 0.5 1.5 - 2.5 14.4 + 0.3 2.4 - 3.8 TACT AND KEY SWITCHES 0.3 0.3 0.4 0.3 0.3 1.2 14.4 + 0.3 2.4 - 3.8 14.4 + 0.3 3.5 - 4.9 14.5 + 0.3 2.4 - 3.8 20.5 + 0.4 1.6 - 2.8 14.8 + 0.4 1.5 - 2.5 14.6 + 0.4 2.6 - 4.2 14.6 + 0.4 2.6 - 4.2 >3 FOOT SWITCHES 6.
PAGE 3
| 200 MICRO-SIGNAL SWITCHES Difference travel max. in mm Free position (FP) max. in mm Permissible total travel position (TP) in mm Lever drawing 0.3 13.4 16 L01 L11 z 19.5 22.1 14 16.6 18 23.5 L12 z 12.6 18.2 L02 z 19.5 22.1 L11 z 13.4 16 0.3 13.4 16 z 0.3 0.3 0.9 0.7 0.3 0.3 0.3 13.4 16 z 0.3 13.4 16 pushbutton long side rounded 14.4 + 0.3 2.4 - 3.8 14.4 + 0.3 2.4 - 3.8 14.7 + 0.5 2.4 - 3.8 14.7 + 0.5 0.8 - 1.3 0.8 - 1.4 20.8 + 0.5 1.5 - 2.5 15.3 + 0.5 1.5 - 2.
PAGE 4
Lever drawing Miscellaneous Stock version MICRO-SIGNAL SWITCHES milled bearing blade z SNAP-ACTION SWITCHES 13.4 16 13.4 16 0.8 - 1.4 1.5 - 2.5 0.5 - 1.1 0.5 - 1.1 Ag Ag Ag Ag Ag Ag Ag Ag Ag Ag Ag <3 <3 <3 <3 <3 <3 <3 <3 <3 <3 <3 <3 POWER TOOL SWITCHES 14.7 + 0.5 0.2 - 0.6 14.7 + 0.5 0.2 - 0.6 20.8 + 0.5 0.5 - 1.1 20.8 + 0.5 0.5 - 1.1 14.7 + 0.5 14.7 + 0.5 20.8 + 0.5 1.5 - 2.5 20.8 + 0.5 1.5 - 2.5 22 +1 20.8 +1.2 0.7 - 1.25 15.4 +1.2 TACT AND KEY SWITCHES 0.
PAGE 5
SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES ROCKER SWITCHES TO 21 ( 8 ) A 250 V AC 16 20.2 4 10.2 ø3 8.4 3 10.3 16 16 8.7 3 16 16 10.3 3.4 3.4 22.2 22.2 28 28 Solder terminal 22.2 10.3 6.3 ø1.6+0.1 4 2.5 4 3.4 3 10.3 SLIDE SWITCHES 16 16 5.6 ø3 7.5 10.3 20.2 4 ø3 Quick-connect terminal 6.3 Basic type 1005 TOGGLE SWITCHES PUSHBUTTON SWITCHES 10.3 10.3 20.2 ø3+0.1 8.65 22.
PAGE 6
SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES TO 21 ( 8 ) A 250 V AC ROCKER SWITCHES TP PUSHBUTTON SWITCHES Basic types 1004 and 1005 switching positions 18.2 12.6 < 15.4 ±1.2 SLIDE SWITCHES TP OP FP 35.7 TP OP 14 < L02: straight lever ROTARY SWITCHES L01: straight lever OP FOOT SWITCHES POWER TOOL SWITCHES 19.5 22.1 20.8 ±0.5 < L04: straight lever 20.6 TP FP ø5 TP OP 9.8 21.5 < 15.7 ±2.7 FP 78 L11: roller lever L31: spring lever 19.
PAGE 7
SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES 38 Insulating plate for solder terminal 0.5 mm: 231.009.011 Additional parts SENSORS MICRO-SIGNAL SWITCHES SNAP-ACTION SWITCHES TACT AND KEY SWITCHES POWER TOOL SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES | 204 Further information under WWW.MARQUARDT.DE 25.5 25.5 ROCKER SWITCHES TO 21 ( 8 ) A 250 V AC 43 Insulating plate for quick-connect terminal 0.5 mm: 231.010.011 0.8 mm: 231.010.