Datasheet

ManualsBrandsMARQUARDT ManualsPush Actuated Switches & ButtonsMicroswitch 250 Vac 2 A 1 x On/(On) momentary 1 pc(s)

207

SENSORS MICRO-SIGNAL SWITCHES TACT AND KEY SWITCHES POWER TOOL SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES ROCKER SWITCHESSNAP-ACTION SWITCHES

Design DIN 41635 C

Contact resistance (new condition) < 100 mOhm (1 A 12 V DC)

Insulation resistance (new condition) > 100 MOhm (500 V DC)

Voltage strength at 250 V 1 500 V function insulation / basic insulation

3 000 V reinforced insulation (depending on installation

situation)

500 V small contact distance

Proof tracking 250 PTI

Insulation spacing acc. to EN 61058 for reinforced or double insulation

Protection type IP 00

Ambient temperature -20 °C ... +85 °C ... +120 °C (basic type 1014 brief)

Flammability UL 94 V-2

Heat and ﬁ re resistance 850 °C (category D)

Material actuator

housing

connections

spring steel / PA glass ﬁ ber-reinforced / PA / metal (only

1017.0153)

PA glass ﬁ ber-reinforced / PA

silver-plated

Bounce time < 5 ms

Approval marks

Suitable for appliances of protection class II under compliance with the installation conditions

required on the equipment side

ON REQUEST

Extended overtravel

Special base forms

Special actuating cams

In addition to a wide range of normally

closed contacts, normally open contacts and

changeover switches, bistable changeover

switches (basic type 1011) and spring sets without

snap function (basic type 1017) are available



PRODUCT FEATURES

Powerful snap-action switch with C-spring

contact system according to design DIN 41635C

High switching reliability due to large contact

forces directly after switching

Small size, large travel and difference travel

Short bounce time

Contact system insensitive to vibrations



SERIES 1010 - OPEN SNAP-ACTION SWITCHES

TO 10 (3) A 250 V DC

Summary of content (5 pages)

PAGE 1
SERIES 1010 - OPEN SNAP-ACTION SWITCHES Short bounce time Contact system insensitive to vibrations Design DIN 41635 C Contact resistance (new condition) < 100 mOhm (1 A 12 V DC) Insulation resistance (new condition) > 100 MOhm (500 V DC) Voltage strength at 250 V 1 500 V function insulation / basic insulation 3 000 V reinforced insulation (depending on installation situation) 500 V small contact distance Proof tracking 250 PTI Insulation spacing acc.
PAGE 2
SERIES 1010 - OPEN SNAP-ACTION SWITCHES Mechanical life endurance Difference travel max. in mm Free position (FP) max. in mm Permissible total travel position (TP) in mm Operating position (OP) in mm Ag 0.25 - 0.6 2.2 + 0.6 0.9 0.4 3.5 1E6 Miscellaneous Stock version Actuator description Contact material 9.5 long Operating force in N Connection description Connection type PUSHBUTTON SWITCHES 10 (3) A 250 V AC 1E4 6 (2) A 250 V AC 25E3 2 (0.5) A 250 V AC 20E4 2 (0.
PAGE 3
SNAP-ACTION SWITCHES TACT AND KEY SWITCHES POWER TOOL SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES z Contact material Operating force in N Au 0.3 - 0.8 9.2 long Au Further information under WWW.MARQUARDT.DE < 2.1 0 2.6 Changeover switch with OFF position in the center (SPDT momentary - Center OFF) PUSHBUTTON SWITCHES ROCKER SWITCHES without approval mark TOGGLE SWITCHES Miscellaneous 50E4 Stock version Mechanical life endurance 6.6 + 0.5 0.6 8.6 5.
PAGE 4
SERIES 1010 - OPEN SNAP-ACTION SWITCHES 2.6 2.1 Solder terminal 45° angled 9.5 long TP 17.75 1.15 4.2 Solder terminal 45° angled 9.5 long 7.5 4.2 1.15 5.1 TP OP 6.9 ±0.6 9.7 FP RL ø1 .78 0.5 4.25 4 ø1.78 1 PCB terminal right angled 1010.9852 FP OP TP PCB terminal right angled 1010.9802 2.2 2.2 4.8 3 5.5 TP OP FP ø1 4.8 5.5 ø1.78 1.75 8 3.3 4.5 2 3.8 ±0.6 6.6 RL 1 1.75 8 17.15 .78 FOOT SWITCHES 8 3.3 4.5 1.75 17.75 0.5 4.25 FP 3 PCB terminal left angled 7.5 4.
PAGE 5
SERIES 1010 - OPEN SNAP-ACTION SWITCHES TO 10 ( 3 ) A 250 V DC 1.3 1 10 5 6.6 TH FH 5.5 8 1.5 1 3.8 2.5 PUSHBUTTON SWITCHES 2 1.2 5 10 5 11 1.3 Bistable snap-action switches as changeover switch: The swivel-mounted housing with molded cam serves as an actuator. ROCKER SWITCHES 22 5 7.5 SLIDE SWITCHES 2 3.5 7.4 2.5 12.5 13.5 4.5 2.8 1.8 0.15 7.5 5 6.8 4.8 9.2 2.5 1 1.5 1.4 4 2.5 5 PCB terminal left angled OG TP Solder terminal POWER TOOL SWITCHES 4.2 2.6 0.