Datasheet

ManualsBrandsMarquardt ManualsMicroswitchesMicro Switch 1010, 2A, 1CO, 0.6N, Spring Lever

SenSorS micro-Signal SwitcheS tact and Key SwitcheS Foot SwitcheS rotary SwitcheS Slide SwitcheS toggle SwitcheS

211 ]

EcoPush‘n‘DrivE

H series 1010 - open snap-aCtion switChes

to 6 (2) a 250 v aC

RockeR switchessnap-action switches pushbutton switches

Design DIN 41635 C

Contact resistance (new condition) < 100 mOhm (1 A 12 V DC)

Insulation resistance (new condition) > 100 MOhm (500 V DC)

Proof tracking 250 PTI

Protection type IP 00

Ambient temperature -20 °C ... +85 °C ... 120 °C (basic type 1014)

Flammability UL 94 V-2 or

UL 94 HB

Glow wire test temperature 850 °C

Material actuator

housing

terminals

spring steel / PA glass ﬁber-reinforced / PA / metal (only 1017.0153)

PA glass ﬁber-reinforced / PA

silver plated

Bounce time < 5 ms

Approval marks

Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side

PRODUCT FEATURES

 Powerful snap-action switch with C-spring contact

system according to design DIN 41635C

 High switching reliability due to large contact forces

directly after switching

 Small size, large travel and difference travel

 Short bounce time

 Contact system insensitive to vibrations

ON REQUEST

 Extended overtravel

 Special base forms

 Special actuating cams

 In addition to a wide range of normally closed contacts,

normally open contacts and changeover switches and

spring sets without snap function (basic type 1017) are

available

Summary of content (4 pages)

PAGE 1
H Series 1010 - Open snap-action switches Design DIN 41635 C Contact resistance (new condition) < 100 mOhm (1 A 12 V DC) Insulation resistance (new condition) > 100 MOhm (500 V DC) Proof tracking 250 PTI Protection type IP 00 Ambient temperature -20 °C ... +85 °C ... 120 °C (basic type 1014) Flammability UL 94 V-2 or UL 94 HB Glow wire test temperature 850 °C Material spring steel / PA glass fiber-reinforced / PA / metal (only 1017.
PAGE 2
H Series 1010 - Open snap-action switches Stock version Ag 0.25 - 0.6 2.2 ±0.6 0.9 0.4 3.5 1E6 1010.7402 ¢ 9.5 long Ag 0.45 - 1.05 2.2 ±0.6 0.9 0.4 3.5 1E6 0.15 - 0.5 2.2 ±0.6 3.2 1E6 without approval mark ¢ 3.6 0.4 1E6 without approval mark 3.2 1E6 without approval mark 2 10E4 Rocker Switches Pushbutton Switches Toggle Switches Normally closed contact (SPNC) Rotary Switches Slide Switches 1010.7601 Normally open contact (SPNO) 1017.0801 ¢ 1017.5701 ¢ Foot switches 1017.
PAGE 3
PCB terminal right angled 1010.9802 1 17.75 1.15 0.5 4.25 ø1.78 PCB terminal right angled 1010.9852 7.5 4.2 RL 4.25 7.5 4.2 17.15 RL Foot switches PCB terminal straight Rotary switches TH ø1.3 +0.1 2.5 Slide switches 3.5 Solder terminal 45° angled MP 18 Toggle Switches 4 2.6 Pushbutton switches 5 7.5 Tact and Key switches PCB terminal left angled Snap-action switches 1.75 2.5 15 10 90° 0.4 2.2 ±0.6 3.5 3.6 0.2 0.9 ±0.
PAGE 4
H Series 1010 - Open snap-action switches to 6 (2) A 250 V AC Rocker Switches PCB terminal vertical: FP 13.8 A switch actuation vertical to the PCB can be implemented in a confined space with this version. 2.5 10 Basic type 1010 Vertical PCB terminal: According to the same functional principle as basic type 1010, but in smaller size. TP OP FP 5.5 5.3 6.6 ±0.5 8.6 Slide Switches 3.5 7.4 1.6 RL 2 2.5 2.5 12.5 13.5 This basic type is designed for low voltages and has no approval mark. 4.