Datasheet

SENSORS
MICRO-SIGNAL SWITCHES SNAP-ACTION SWITCHES TACT AND KEY SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES ROCKER SWITCHESSNAP-ACTION SWITCHES ROCKER SWITCHES
|
166
SERIES 1055 - SUBSUBMINIATURE SNAP-ACTION SWITCHES IP 67
TO 4 A 12 V OR 2 A 24 V DC
Approach angle up to 40°
40°
The robust pushbutton guide allows actuations by slides or camshafts with an
approach angle of < 40° (depending on the friction partner).
The mechanical life endurance depends on the material and surface properties
of the slide and the installation situation in the appliance. Under optimum condi-
tions and longitudinal actuation, 200E3 cycles can be achieved.
The above sketch can be transposed to the basic types 1056 and 1058.
Auxiliary actuators
L02: straight lever
191.081.041
2.2
17.2
TP OP FP
8.3
9.7±0.45
<11.5
MP
L21: simulated roller
191.081.031
1
10.3 TP
12.4
±0.65 OP
<14.7 FP
L31: differetial lever
191.081.011
2.2
MP
8.25 TP
9.7
±0.45 OP
<11.6 FP
The auxiliary actuators are
available as additional parts for
the basic types 1055 and 1058
for retrofitting or are already
pre-assembled depending on
the product.
When assembling yourself, make
sure that the lever is pushed into
the housing slot right up to the
stop.
Fastening disc
140.092.021
fastening disc for the basic types
1055, 1056 und 1058
The fastening disc offers a quick, reli-
able fastening possibility in combinati-
on with switches with 5 mm long pins
to plates or plastic parts with a wall
thickness up to 2.5 mm.