Owner`s manual

Ground Fault Circuit Interrupters (GFCI) are available
from your Marquis Spas dealer.
NOTE: Ensure the GFCI is properly installed. Failure
to do so may result in spa malfunction or damage
which is not warranted.
A pressure wire connector is located on the exterior
of the control box. This pressure wire connector
should be bonded with at least #8 AWG (8.42mm
2
,
#6 in Canada) copper wire to any metal ladder, metal
water pipe, common bonding grid (reinforced con-
crete slab, ground plate beneath the spa), or any
other metal within five feet of the spa.
perfect fit!
installation instructions
14