Owner`s manual

perfect fit!
PUMP PRIMING (Pr)
Pump priming feature begins at start-up. When your
spa is energized, the LCD window displays a “Pr”
message. This mode lasts approximately four to five
minutes, if not exited manually by pressing the
TEMP pad.
UNDERWATER AND ENTRYWAY LIGHTS
Press the LIGHT pad to turn the underwater and
entryway (option) lights on and off. The low-voltage
system produces a night light for evening use and
makes entering and exiting the spa safer. After
being on for 60 minutes, the lights automatically
turn off.
JETS
Use the JETS pad on the bather panel or remote
control. First press of the JETS pad activates pump
on low-speed (and starts soak timer). Second
press of the JETS pad activates pump on high-
speed. Third press of the JETS pad turns jets off for
all-quiet mode. Fourth press of the JETS pad turns
pump back to low-speed. If the pump is already on
low (heating, filter cycle) then the first press starts
the soak timer. After running on low- or high-speed
for 15 minutes, the pump automatically turns off
(unless in heating or filtering cycle).
SOAK TIMER
The soak timer starts the first time you press a JETS
pad. The LCD window displays the elapsed time (1-
30) for 55 seconds then switches to the current
water temperature for five seconds then back to
the timer. It continues to alternate for the entire 30
RENDEZVOUS AND RETREAT
spa control operation
20