Owner`s manual

perfect fit!
minutes. The timer runs for 30 minutes regardless
of other functions in use (jets, temperature, or light).
You can manually cancel the timer by pressing the
TEMP+- pad and then the LIGHT pad.
CONSTANTCLEAN™ WATER MANAGEMENT
WITH SMARTCLEAN™
Factory Default Settings:
• Filter Cycle Duration: F2 (2 hours)
• Filter Cycles: 2C (twice per day)
• Smart Logic: 1H (1 hour)
These settings represent the most commonly used
settings, but your use may be different, depending
upon many variables – frequency, number of
bathers, duration, water capacity, etc. These vari-
ables affect the quality of water and the way it
should be managed to achieve the most effective
cleansing. Selectable choices for the settings of the
operation systems allow flexibility and ensure your
Everyday Hot Tub remains easy to maintain for your
particular set of circumstances.
SOLID-STATE OZONATOR
The ozonator greatly reduces the amount of chemi-
cal sanitizer you need in the water to keep your
water clean. The ozonator functions whenever the
system is operating on filter or clean up cycles. You
should occasionally inspect your ozonator to ensure
it continues to light (see MAINTENANCE, Every
Three to Four Months). A good time to do this is
when you drain and fill your spa.
SMARTCLEAN™ FILTRATION
Your spa is preset at the factory with a default
setting to filter itself using the jet pump on low-
speed for two hours twice in a 24-hour period.
These settings represent the filter settings neces-
sary for average use. The timing of the first filter
cycle is determined by when the spa was initially
energized. The first cycle begins six minutes after
this initial power-up. The second filter cycle begins
12 hours after the first cycle.
To adjust the filter settings
First press of the SETTINGS pad displays the filter
time settings (F1, F2, F4, F6). Use the TEMP+- pad to
scroll through the options. When desired selection
has been reached, press SETTINGS pad again to
enter selection and advance to the filter cycle
settings (2C, 1d, 1n). For example, if you select 2C
and F2, your spa will filter two hours twice a day for a
total of four hours of filtration daily.
spa control operation
Optional Marquis
Ozonator reduces the
need for chemical
sanitizers.
21