Owner`s manual

perfect fit!

IMPORTANT CHEMICAL SAFETY

PROCEDURES

1. Always keep chemicals out of reach of children.

2. Read product labels carefully prior to use.

3. When dissolving, always add chemicals to water,

do not add water to chemicals. Some dry

chemicals should be dissolved prior to adding

them to the spa. Using a clean container, dip

some water from the spa. Mix until dissolved,

then add to circulating water.

4. CAUTION: Do not add chemicals together. Add

them separately to the spa water.

5. All chemical products should be stored in a cool,

dry, well-ventilated area where the average

temperature does not exceed 90°F (32°C).

Keep storage area clean of debris such as rags,

newspaper, and combustible materials.

6. Keep chemicals away from open flame or other

heat source. Do not smoke near chemicals. If a

dry chlorine chemical fire should occur, use

water only. Do not use a dry chemical fire

extinguisher to attempt to put out the fire.

7. When adding chemicals, always keep the water

circulating in the spa with jets in a downward

circular pattern for better chemical distribution.

Add chemicals to the spa water one at a time.

Allow several minutes between any new chemi-

cal additions using the jet action to evenly

distribute throughout the spa.

8. Wait approximately 15 minutes after adding

chemicals to retest your water for an accurate

reading. Retest your spa water before using.

9. If you have any questions or concerns about the

correct procedures for handling chemicals,

please contact your spa dealer or Marquis Corp.

spa care and enjoyment guide