Owner`s manual

Destiny, Envy, Euphoria, Mirage, Promise,

Quest, Rendezvous, Resort, Reward, Spirit

PUMP PRIMING (Pr)

Pump priming feature begins at startup. When your spa

is energized, the LCD window displays a “Pr” message.

This mode lasts approximately four to five minutes, if not

exited manually by pressing the TEMP+- pad.

On one-pump models: If you have problems priming

the pump use the thumbscrew to relieve the air lock to

the pump. Use this solution as you are filling the spa or if

the pump is running but no water is coming out of the

jets. See Equipment Diagram for more information.

UNDERWATER AND ENTRYWAY LIGHTS

Press the LIGHT pad on bather’s panel or remote

control (option) to turn the underwater and Entryway

lights on and off. The low-voltage system produces a

night light for evening use. After being on for 60

minutes, the lights automatically turn off.

AQUA AMBIANCE™ AND CONSTELLATION™

Use SPA LIGHT pad. Step one: turn on light. Step two:

turn off and then on within 2-3 seconds.

NOTE:NOTE:

NOTE: LED lights and non-LED lights do not qualify for

labor coverage. These parts can be purchased or ex-

changed under warranty at your authorized Marquis

Spas

dealer.

WATERFALL FEATURE (OPTION)

The Waterfall feature and convenience tray attaches

securely to the dual Vortex skimmer tops. NOTE: Don’t

remove the waterfall top while the pumps are running.

JETS

Use the JETS pad on the bather panel or remote control.

First press of the JETS pad activates pump on low-

speed (and starts soak timer). Second press of the JETS

pad activates pump on high-speed. Third press of the

JETS pad turns jets off for all-quiet mode. Fourth press of

SPA CONTROL OPERATION