Owner`s manual

EPIC & SHOW CONTROLS

PUMP PRIMING (Pr)

Pump priming feature begins at startup. When your spa

is energized, the LCD window displays a “Pr” message.

This mode lasts approximately four to five minutes, if not

exited manually by pressing the TEMP+ pad.

UNDERWATER AQUA AMBIANCE™, ENTRY-

WAY LED LIGHTS AND CONSTELLATION™

Press the LIGHTS pad on the bather’s panel or

remote control (option) to turn the lights on and off.

The icon appears in the lower center of the display

when the light is on. For Constellation, press LIGHTS

pad to turn on step one color. To change colors,

press LIGHTS pad again to turn off for one second.

Then press LIGHTS pad again for step two color.

Repeat for all color options. After being on for 60

minutes, the lights automatically turn off. (See

SETTINGS for automatic light programming.)

TRAY FEATURE

The Epic’s Waterfall feature and convenience tray

attaches securely to the dual Vortex skimmer tops.

NOTE: Don’t remove the waterfall top while the

pumps are running. The tray feature on the Show

attaches to the spa interior.

SOAK TIMER

The soak timer starts the first time you press the

TIMER pad. The LCD window displays “E” for the

elapsed time followed by time in minutes (“00, 01,

02”, etc.). A second press of the TIMER pad will exit

the timer mode. The timer display and the current

temperature display will alternate every 10 seconds.

SPA CONTROL OPERATION

EPIC 9-BUTTON PANEL

SHOW 10-BUTTON PANEL

102° F