Owner`s manual

THE ENVY

# Component Identification Qty.

1HK

8 Jets 3

2 HK™12 Jets 8

4 HK™40 Jets 3

5 Light (option) 1

7 Suction Fittings 2

8 Floor Drain 1

9 Jet Selector 1

11 Bather’s Control Panel 1

12 Filter Canister 1

13 Spa Frog

(option) 1

14 Spa Frog

Return Fitting (option) 1

15 Ozone-ready Injector Fitting 1

19 Constellations

(option) 12

Physical Specifications Size

Dimensions 76" diameter

Height 35"

Seating Capacity/Positions 4/5

Weight Dry/Lbs. 550

Weight Full/Lbs. 2635

Water Capacity/Gallons 250

Total Therapy Jets 14

ATTENTION: If you have problems priming the pump use the black thumbscrew in the upper corner of the door

area to relieve the air lock to the pump. Use this solution as you are filling the spa or if the pump is running but no

water is coming out of the jets. Please refer to start up instructions in the Owner’s Manual.

1. Make sure the spa power is off.

2. Remove the door.

3. Remove the thumbscrew while filling the spa. (If spa is full remove the thumbscrew and let all air purge.)

4. Once air is purged replace the thumbscrew.

5. Power up the spa.

6. Make sure there are no leaks at the thumbscrew. Replace the door.