Product Overview

M–17
The largest selection of motors, components and accessories for the HVAC/R Industry
Condenser Fan Motors - Single Phase - PSC
5
1
⁄2 inch dia. MARS SERIES 100
MARS
10727 3727 FSE1016S 1859 D917 X411 WG840727 43727 S1-FHM3727 W51-16CJA1-01 P257-8727 01-0160
10728 3728 FSE1026S 1860 D909 X412 WG840728 43728 S1-FHM3728 W51-14CJA1-01 P257-8728 01-0161
10729 3729 FSE1036S 1861 D908 X413 WG840729 43729 S1-FHM3729 W51-13CJA1-01 P257-8729 01-0162
10730 3730 FSE1056S 1862 D907 X414 WG840730 43730 S1-FHM3730 W51-12CJA1-01 P257-8730 01-0163
10731 3731 FSE1076S 1868 D933 WG840731 43731 S1-FHM3731 51-42534-19 P257-8731 01-0164
10403 3403 FSE1018SF 1873 D798 X465 60825 51-23055-12 0165
10404 3404 FSE1028SF 1874 D934 WG840204 40825 S1-FHM3204 51-23054-13 0166 R22445
10405 3405 FSE1038SF 1875 D796 X451 WG840205 30825 S1-FHM3205 P257-8026 0167 R22345
10746 3746 FSE1058SF 1870 D713 X452 0168 R22245
Outdoor Condenser Fan Motors
MARS up/down outdoor condenser fan motors are designed for either vertical
s
haft-up or shaft-down applications. Shell and end shields are enclosed for
weather protection. A weep hole is provided in each end shield to allow
condensate to drain. All of these motors are suitable for air conditioning or heat
pump applications.
Features:
•
All angle, sleeve or ball bearing
• Rheem mounting holes
w/screws installed
•
Reversible rotation
•
Water slinger on shaft
•
Thru bolt or band mounting
• Capacitor requirement noted on
motor label
•
Up/down design
•
Double full flatted shaft
Specifications:
• Class “B” insulation
• Single phase, 60 Hertz
• Thermal overload protected
• Fan duty, continuous, air over
• 26 & 36 inch leads
60˚C
®
Cross Reference
MARS
No.
GE/
Genteq
Century/
AO Smith
US Motors/
Emerson
Fasco Marathon Wagner Packard
YORK
Source 1
Rheem/Ruud
Protech
Carrier/Totaline
RCD
Nordyne
Partner's
Choice
ROTOM
Reversible Rotation - Single Speed
10727 1/6 208-230 0.90 5/370 TEAO Sleeve 6.50 4.23 1/2 26”
10728 1/4 208-230 1.8 5/370 TEAO Sleeve 6.50 4.23 1/2 26”
10729 1/3 208-230 2.4 7.5/370 TEAO Sleeve 6.50 5.23 1/2 26”
10730 1/2 208-230 3.5 10/370 TEAO Sleeve 6.50 5.73 1/2 26”
10731 3/4 208-230 5.2 10/370 TEAO Ball 6.50 6.23 1/2 30.5”
10403 1/6 208-230 1.0 5/370 TEAO Sleeve 6.50 4.23 1/2 36”
10404 1/4 208-230 2.2 5/370 TEAO Sleeve 6.50 4.48 1/2 36”
10405 1/3 208-230 1.9 7.5/370 TEAO Sleeve 6.50 5.23 1/2 36”
10746 1/2 208-230 2.8 12.5/370 TEAO Sleeve 6.50 5.70 1/2 36”
MARS
NO.
HP VOLTS AMPS
CAP
REQUIRED
ENCL. BRG.
DIMENSIONS
LEAD
LENGTHS
A B C
C
A
B
A
B
C
1075 RPM
825 RPM