Instructions / Assembly

READ FIRST
WARNING!
Installation Guide
MARS Motor No. 10858/10859
MARS Technical Help Line: 800-678-9888
M-F 8 am - 5 pm Eastern
This Bluetooth enabled motor includes all necessary connections to replace X13
®
, Endura Pro
®
, Ensite
®
,
Digi-Motor
®
and SelecTech
®
constant torque ECMs. Use the correct harness / adapter for your application.
T
o
p
r
e
v
e
n
t
e
l
e
c
t
r
i
c
s
h
o
c
k
,
p
e
r
s
o
n
a
l
i
n
j
u
r
y
,
o
r
d
e
a
t
h
,
t
u
r
n
o
f
f
t
h
e
e
l
e
c
t
r
i
c
p
o
w
e
r
a
t
t
h
e
d
i
s
c
o
n
n
e
c
t
o
r
m
a
i
n
s
e
r
v
i
c
e
p
a
n
e
l
p
r
i
o
r
t
o
m
a
k
i
n
g
a
n
y
e
l
e
c
t
r
i
c
a
l
c
o
n
n
e
c
t
i
o
n
s
.
Bluetooth ECM
The factory speed tap harness can be re-used or the included 5 tap harness can be used in its place to provide additional torque options.
NOTE: Most motors designate tap 1 as lowest torque and tap 5 as highest torque; but some may be the opposite. Adjust tap orientation
as necessary. If the factory wire harnesses do not fit this Azure motor or any of the included adapters, then do not attempt to use this
motor. No cutting of wire harnesses should ever be necessary.
Autosizing this motor automatically self programs the necessary torque for each exact application; this often results in better performance
than a ‘pre-programmed’ replacement ECM. The autosizing process can be repeated as many times as desired; the module will simply
write over the previous torque settings. Bluetooth provides simple autosizing and RPM adjustments with the use of an Apple or Android
smartphone.
BLUETOOTH IS NOT REQUIRED TO INSTALL THIS MOTOR. Motor 10858 is preprogrammed for 1/2HP applications and ready to install
out of the box. Autosizing should be run for lower HP applications OR to optimize 1/2HP applications. Motor 10859 is preprogrammed for
1HP applications and ready to install out of the box. Autosizing should be run for lower HP applications OR to optimize 1HP applications.
Apple
Scan QR code
for installation video
(continued on back)
®
Delivering Confidence
www.marsdelivers-contractors.com
©
2021 MOTORS & ARMATURES, Inc.
All rights reserved. MARS is a registered
trademark of Motors & Armatures, Inc.
98699 8/21
Android
To 24V For Autosizing
Set Rotation
Set Voltage
To Factory Power Harness
To Factory Speed Tap Harness
or 5 Wire Azure Speed Tap
Supplied Harness
(If Bluetooth is not being used)
or Azure Supplied Power Harness