User's Manual

pull the trigger and continue to hold in this position until you hear a
tone emit from the SmartReader. You will then be returned to the
parameter menu and your new settings will now be displayed.
7. Once all your parameters have been set
, you can now turn the
SmartTransmitter on. In the same manner y
ou program the
parameters
, select “Radio On?”, select “ON”, press <Enter>, press
<Exit>, <F6> to program, hol
d the nozzle up to the
SmartTransmitter, pull the trigger and wait for the tone. Your
SmartTransmitter is now on and transmitting data.
8. Before testing for a good transmission, you must force the
SmartTransmitter to get a reading from the meter for the first time.
On the parameter selection menu, press <F2>, hold the nozzle up to
the SmartTransmitter, pull the trigger and wait for the tone.
9. Your SmartTransmitter is now transmitting the reading and serial
number of your meter.