User Guide

Quick Start Guide - Cube Dehumidiers
ersion A - 12 - 2020
SET UP INSTRUCTIONS
Step 1:
Step 2:
Rotate dehumidifier 90° and align the arrows on the two labels (one on the bucket and one
on the dehumidifier) and carefully sit the dehumidifier down onto the bucket.
The water level window in the bucket and the user interface buttons on the dehumidifier
should be on the same side when properly stacked. Check to ensure the arrows on the unit
and bucket are aligned as in Fig. 2c for proper operation.
Nested Shipping &
Storage Position
Fig. 1a
Fig. 1b
Separate dehumidifier & bucket from the nested shipping/storage position. Remove all
packaging materials from the unit.
Step 3:
Plug the unit in and press the power button and the unit is ready to
run in normal (bucket) mode.
To nest the unit:
Rotate
dehumidifier 90°
Fig. 2a
User Interface
Buttons and
Water Level
Window
Aligned on the
Same Side
Fig. 2b
Fig. 2c
Fig. 3
Make sure the bucket is dry. Then press the tabs on the inside
bucket feature in so that the unit can nest correctly. See Fig. 3