Product specifications

CashFlow
®
9520 / 9524 / 9528 Design Guide
©
MEI., 2003 Page 21 Rev: G1
Machine interface connector (Connector 1)
Interface connections are via a 17-way header from the standard PCB. This header is a
single row of 17 pins on a 0.1 inch grid. The pin size is 0.025 inch square. Figure 1 shows
the interface connector and pin out
Figure 1
1 Output Coin A
2 Output Coin B
3 Output Common
4 Output Coin F
5 n.c.
6 Output Coin E
7 Output Coin D
8 Output Mode Select
9 Output Coin C
10 Inhibit Coin C
11 Power in +12v
12 Ground (0v)
13 Inhibit Coin D
14 Inhibit Coin E
15 Inhibit Coin F
16 Inhibit Coin B
17 Inhibit Coin A
Dynamic route inhibit (Connector 4)
Route inhibit connections are via a 9-way header from the standard PCB. This header is a
single row of 9 pins on a 0.1 inch grid. The pin size is 0.025 inch square. Figure 2 shows
the interface connector and pin out.
Figure 2
1 Full 1
2 Full 2
3 Full 3
4 Full 4
5 Full 5
6 Full 6
7 Full 7
8 n.c.
9 Ground (0v)
Full = 0 to 1.0V wrt pin 9
Empty = +3.5V
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
2
3
4
5
6
7
8
9