Overview This amplifier has a single channel with the capability of switching between two dynamic ranges, either by front panel push button or supplied footswitch. Each dynamic range yields its own gain structure and sonic character. It is optimised to react to your touch and always retains a substantial tonality wherever you may set your guitar volume.
1 2 3 4 5 6 7 1. Power Switch This is the On/Off switch for the mains electric power to the amplifier. 5. Master Volume This control sets the overall output volume of the amplifier. Note: Please ensure the amplifier is switched off and unplugged from the mains electricity supply whenever it is moved! Tonal tip: It is practical to set this first to suit the venue in which you are playing as the position of this volume largely dictates the optimum positions for the other controls. 2.
1 2 3 4 5 6 1. Footswitch Connecting the supplied footswitch here enables you to perform two functions; you can change the Dynamic Range and toggle the Reverb on and off. The Dynamic Range switch functions exactly the same as the front panel counterpart (11). 7 8 5. Ext FX (Bypass/Loop) When ‘out’ this switch completely bypasses the circuitry involved in the effects loop. Push this switch in to enable the loop. Note: The impedance of the combo’s (2266C) own speakers is 8 ohms.
