OPERATION GUIDE Models: CV340 Series CV500 Series Please read this guide carefully before installaing and using the camera. Please retain this guide for reference.
INFORMATIONMENU FOR USER STRUCTURE LENS DC VIDEO MANUAL EXPOSURE SHUTTER WHITE BALANCE DAY & NIGHT NR 1080 HD-SDI Camera OUTDOOR, INDOOR AUTO 1/30sec ~ 1/50,000sec, x2~x30 AGC LOW, MIDDLE, HIGH AUTO (x20 ~ X30) SENSE-UP OFF BRIGHTNESS 1 ~ 100 D-WDR (ACCE) OFF, LOW, MIDDLE, HIGH DEFOG OFF, LOW, MIDDLE, HIGH BACKLIGHT BLC HSBLC OFF ATW AWC-SET INDOOR OUTDOOR MANUAL 1 ~ 100 AUTO DELAY D-->N (AGC) N-->D (AGC) COLOR B/W BURST IR SMART IR LED IR PWM EXT 2DNR 3DNR S-LEVEL: 0 ~ 100 E-LEVEL: 0 ~ 100 LEVEL 0 ~
OSD Joystick and Button LENS MANUAL, VIDEO, DC Select LENS using the UP or DOWN button. You can change between MANUAL, VIDEO and DC using the LEFT or RIGHT button. MANUAL: Manual Lens (Fixed focal or fixed IRIS lens) VIDEO: Auto Iris Varifocal Lens. DC: DC Auto Iris Varifocal Lens. You can change the DC mode between INDOOR mode and OUTDOOR mode using the LEFT or RIGHT button. INDOOR: Select for indoor installation. OURDOOR: Select for outdoor installation. Press SET button to access the SETUP menu.
EXPOSURE SHUTTER Select EXPOSEURE using the UP or DOWN button. You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and BACKLIGHT menu using the UP or DOWN button. SHUTTER: You can adjust the shutter speed of the lens. You can adjust the shutter speed manually or select shutter speed mode from FLK or AUTO mode using the LEFT or RIGHT button. FLK: Select this when you experience picture flicker, this happen when there is a clash with the installed lighting frequency.
EXPOSURE SENS-UP Select EXPOSEURE using the UP or DOWN button. You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and BACKLIGHT menu using the UP or DOWN button. SENS-UP: When it is in low luminance condition, the camera automatically detects the light level and maintains a clear picture quality if this mode is activated. You can select the sense-up mode from OFF or AUTO mode using the LEFT or RIGHT button. OFF: Deactivates the SENS-UP function. AUTO: Activates the SENS-UP function. 1.
EXPOSURE DWDR(ACCE), DEFOG Select EXPOSEURE using the UP or DOWN button. You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and BACKLIGHT menu using the UP or DOWN button. DWDR(ACCE) : DWDR(ACCE) illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas. You can select the DWDR level from OFF, LOW ,MIDDDLE, or HIGH using the LEFT or RIGHT button. 1. LENS 2.
EXPOSURE BACKLIGHT Select EXPOSEURE using the UP or DOWN button. You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and BACKLIGHT menu using the UP or DOWN button. HSBLC: If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the on-screen detail. SELECT: Select the area to be enhanced (AREA1, AREA2, AREA3, AREA4) You can select the BLC area using UP, DOWM, LEFT or RIGHT button.
DAY & NIGHT COLOR, B/W Select DAY & NIGHT using the UP or DOWN button. You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT or RIGHT button. DELAY: You can select day/night switching delay time from. (0s ~ 60s) D N (AGC): Adjust the brightness of the lighting where the mode switch occurs from day to night. N D (AGC): Adjust the brightness of the lighting where the mode switch occurs from night to day. LEVEL: Adjust level of the IR SMART function.
NR (Noise Reduction) 2DNR, 3DNR Select NR (NOISE REDUCTION) using the UP or DOWN button You can move the menu from 2DNR, 3DNR, LEVEL, and SMART IR and set each menu using the LEFT or RIGHT button. 2DNR: Reducing noise in the brightness of the image. 3DNR: Reducing noise causing by movement. - S-LEVEL: Set the start level of 3DNR function. - E -LEVEL: Set the end level of 3DNR function. LEVEL: Adjust noise reduction level.
SPECIAL D-EFFECT Select SPECIAL using the UP or DOWN button. You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button. D-EFFECT AUTO 10 You can select the digital effect mode from FREEZE, MIRROR, D-ZOOM, and NEG.IMAGE using the UP or DOWN button. FREEZE: You can stop the image or reactivate it. Select ON to freeze the image using the LEFT or RIGHT button.
SPECIAL PRIVACY Select SPECIAL using the UP or DOWN button. You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button. PRIVACY: Task an area you want to hide on the screen. You can select the digital effect mode from SELECT AREA, DISPLAY, COLOR, and DEFAULT using the OFF OFF UP or DOWN button. SELECT AREA: You can select up to 8 PRIVACY areas. You can select the privacy area using the LEFT or RIGHT button.
SPECIAL DEFECT Select SPECIAL using the UP or DOWN button. You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button. DEFECT: Sensors could have defects for something wrong in the process of their storage or manufacturing process. Such defects are called deadOFF pixels, which consist of two types: static dead pixel and dynamic dead pixel.
ADJUST MONITOR Select ADJUST using the UP or DOWN button. You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and NTSC/PAL using the UP or DOWN button. LCD: Select this menu item when using an LCD monitor. You can select the sub-menu using the UP or DOWM button. - GAMMA: Select and adjust the gamma level. - BLUE: Adjust blue the gain level. - RED: Adjust red the gain level. CRT: Select this menu item when using an CRT monitor. You can select the sub-menu using the UP or DOWM button.
RESET TROUBLE SHOOTING Select RESET using the UP or DOWN button. PROBLEM RESET: Reset the camera settings to the factory defaults. You can reset the camera setting using the SET button. Nothing appears on the screen. 1. LENS 2. EXPOSURE 3. WHITE BAL 4. DAY & NIGHT 5. NR 6. SPECIAL 7. ADJUST 8. RESET 9. EXIT SETUP DC ATW AUTO The image on the screen is dim. ● Is lens stained with dirt? Clean your lens with soft, clean cloth. ● Set the monitor to the proper condition.
