- Marshall Electronics Digital Photo Frame User Manual

• TFT-MegaPixel ™ totally digital end to end signal processing
• 2 SDI (SMPTE259M) (ITR-U601) inputs per screen
• Switched SDI output of on screen video is reclocked
• ColorMatch Conversion™ D65 and SMPTE/EBU color space emulation of CRT
• User control for gain and bias of Red, Green, and Blue colors
• HyperProcess™ motion interpolation of interlace images
• On screen display of input status, formats, and menu functions
• Pixel to Pixel native resolution display
• Ready to mount – all brackets are factory installed
• Lightweight – 75% lighter than CRT models
• Direct access for screen adjustments and selections.
• Settings memory restores active state with power off/on cycle
• Easy to use front panel selection of inputs
• Blue Gun for adjustment to SMPTE color bars
• Includes V-PS12-5V-1 Universal power supply (U.L. class 2)
• Three LEDs (Red, Green, Amber) produce 7 different tally indications
• Unique 180 degree tilt adjustment
• Dry erase label for each screen
1
Product Overview
The Rack mounted and tiltable V-R102DP-2SDI represents leading edge technology in LCD imaging for broadcast and pro-
fessional video applications featuring High Resolution, 1.44 megapixel, TFT screens with completely digital signal process-
ing. All video formats are scaled to t on screen in the highest resolution using a state of the art LSI that incorporates 4x4
pixel interpolations with precision Gamma correction.
2
Features
V-PS12-5V-1
Universal power supply
(U.L. class 2)
3
Electrical Specifications
Number of Screens 2
Screen Aspect 4:3 / 16:9 switchable from front panel
Display (Viewing Area) 10.4 Inch diagonal (211.2mm w x 158.4mm h)
Viewing Angles
160 ̊ with protective screen and treatment (130 ̊ H x 120 ̊ V native)
Resolution (RGB Dots) 800H×RGBx600V (1.44 million pixels)
Dot Pitch .264mm square pixel
Contrast Ratio 500:1
Pixel Response 10ms rise / 25ms fall
Brightness (in cd/m²) 400 cd/m²
Backlight Field Replaceable CCFL (50,000 hour half life)
LCD Screen Treatments Anti Reflection, Anti Glare, Hard Coat
Estimated MTBF 5 years of 24/7/365 operation
System NTSC / PAL auto recognition
Inputs per display 2 SDI (SMPTE259M) (IT-R-BT601) per screen (BNC)
Active Outputs 1 SDI of on screen video (BNC)
Color temperature
D65 (6500 ̊ Kelvin)
Color Gamut SMPTE-C/EBU
Luma Linearity Typical +/- 3% with 5 ire increments (0 to 10 ire)
Power Required 10.4 to 16.8 VDC
Power Consumption Approx. 30 watt nominal
Operating temperature
32 ̊ F to 120 ̊ F (0 ̊ C to 50 ̊ C)
Storage temperature
-4 ̊ F to 120 ̊ F (-20 ̊ C to 50 ̊ C)
Compliance
Œ, FCC-Class A, ANSI-63.4 (Certificates on file)
RoHS WEE / Environmental
Do not dispose. Return to Manufacturer or Authorized Recycle Facility
3
2
V-R102DP-2SDI Users Guide
Marshall Electronics
Dimensions 19.12” w x 8.67” h x 1.5” d (485.7mm x 220.22mm x 38.1mm)
V-R102DP-2SDI Weight 5.5 lbs (2.4 kg)
V-PS12-5V-1 Power Supply Weight 1 lbs (0.45kg)
4
Mechanical Specifications
5
Operational Setup
1. Unpack the V-R102DP-2SDI and accompanying V-PS12-5V-1 power supply. Physically inspect for any damage that may
have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608.
If you are not located within the continental united states call [phone].
2. After inspection, install in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required
when installed to prevent possible damage to the V-R102DP-2SDI internal components.
3. Connect required cables for signal input and output.
Please note that power must be applied to the V-R102DP-2SDI for all outputs to be activated.
All BNC connectors should be rated for 75Ω.
4. Plug the V-PS12-5V-1 power supply into the A.C. source
5. Attach twist lock power connection from V-PS12-5V-1 power supply to the back of the unit.
6. Turn on the V-R102DP-2SDI by depressing the power switch located on the front of the unit.
6
Connectors
* Tally lamps active when connected to ground
Monitor 2
SDI
In
Channel 1 and 2
12 VDC from
V-PS12-5V-1 power
supply
Left Pin - Pos
Right
Pin- Neg
Pin1-M1Grn
Pin2-M1Red
Pin3-M1Yel
Pin4-Gnd
Pin5-Gnd
Pin6-
Pin7-
Pin8-
Pin9 -Gnd
Pin10-Gnd
Pin11-M2Grn
Pin12-M2Red
Pin13-M2Yel
Pin14-
Pin15-Gnd
Tally
IN
DB-15
Female
Monitor 1
SDI
In
Channel 1 and 2