User manual

ManualsBrandsMarshall electronic Manualscar TFT monitorsFlat Panel Television V-R82DP-HDSDI

• TFT-MegaPixel ™ totally digital end to end signal processing

• One HDSDI/SDI (SMPTE259M/292M) (ITR-U601) input per screen

• Reclocked HDSDI/SDI output of on screen video

• ColorMatch Conversion™ D65 and SMPTE/EBU color space emulation of CRT

• User control for gain and bias of Red, Green, and Blue colors

• HyperProcess™ motion interpolation of interlace images

• On screen display of input status, formats, and menu functions

• Pixel to Pixel native resolution display

• Ready to mount – all brackets are factory installed

• Lightweight – 75% lighter than CRT models

• Direct access for screen adjustments and selections.

• Settings memory restores active state with power off/on cycle

• Easy to use front panel selection of inputs

• Blue Gun for adjustment to SMPTE color bars

• Includes V-PS12-5V-1 Universal power supply (U.L. class 2)

• Three LEDs (Red, Green, Amber) produce 7 different tally indications

• Unique 180 degree tilt adjustment

• Dry erase label for each screen

Product Overview

The Rack mounted and tiltable V-R82DP-HDSDI represents leading edge technology in LCD imaging for broadcast and

professional video applications featuring High Resolution, 1.44 megapixel, TFT screens with completely digital signal process-

ing. All video formats are scaled to ﬁ t on screen in the highest resolution using a state of the art LSI that incorporates 4x4 pixel

interpolations with precision Gamma correction.

Features

All signal types and frame rates are automatically detected

• 525 –60i / 625 - 50i (Interlaced NTSC/PAL)

• 720 x 486P (Progressive 30P)

• 720 x 576P (Progressive 25P)

• 720 x 1280 – 23.97P, 24P, 25P, 50P, 59.94P, 60P (Progressive)

• 1035 x 1920 - 59.94i, 60i (Interlaced)

• 1080 x 1920 – 50i, 59.94i, 60i / 23.973Psf, 24Psf, 25Psf, 29.97Psf, 30Psf

Psf=Progressive or Segmented Frame formats

V-PS12-5V-1

Universal power supply

(U.L. class 2)

Electrical Specifications

Number of Screens 2

Screen Aspect 4:3 / 16:9 switchable from front panel

Display (Viewing Area) 8.4 Inch diagonal (170.4mm W x 127.8mm H)

Viewing Angles

160 ̊ with protective screen and treatment (130 ̊ H x 120 ̊ V native)

Resolution (RGB Dots) 800H×RGBx600V (1.44 million pixels)

Dot Pitch .213mm square pixel

Contrast Ratio 500:1

Pixel Response 10ms rise / 25ms fall

Brightness (in cd/m²) 500 cd/m²

Backlight Field Replaceable CCFL (50,000 hour half life)

LCD Screen Treatments Anti Reflection, Anti Glare, Hard Coat

Estimated MTBF 5 years of 24/7/365 operation

System NTSC / PAL auto recognition

Inputs per display HDSDI/SDI (SMPTE259M, 292M) (ITR-U601) per screen (BNC)

Active Outputs 1 HDSDI/SDI per screen (BNC)

Color temperature

D65 (6500 ̊ Kelvin)

Color Gamut SMPTE-C/EBU

Luma Linearity Typical +/- 3% with 5 ire increments (0 to 10 ire)

Power Required 10.4 to 16.8 VDC

Power Consumption Approx. 30 watt nominal

Operating temperature

32 ̊ F to 120 ̊ F (0 ̊ C to 50 ̊ C)

Storage temperature

-4 ̊ F to 120 ̊ F (-20 ̊ C to 50 ̊ C)

Compliance

Œ, FCC-Class A, ANSI-63.4 (Certificates on file)

RoHS WEE / Environmental

Do not dispose. Return to Manufacturer or Authorized Recycle Facility

V-R82DP-HDSDI

Users Guide

Marshall Electronics

Dimensions 19.12” w x 8.67” h x 1.5” d (485.7mm x 220.22mm x 38.1mm)

V-R102DP-HDSDI Weight 5.5 lbs (2.4 kg)

V-PS12-5V-1 Power Supply Weight 1 lbs (0.45kg)

Mechanical Specifications

Operational Setup

1. Unpack the V-R82DP-HDSDI and accompanying V-PS12-5V-1 power supply. Physically inspect for any damage that may

have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If

you are not located within the continental united states call +1 310-333-0606.

2. After inspection, install in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required

when installed to prevent possible damage to the V-R82DP-HDSDI internal components.

3. Connect required cables for signal input and output. Please note that power must be applied to the V-R82DP-HDSDI for all

outputs to be activated. All BNC connectors should be rated for 75Ω.

4. Plug the V-PS12-5V-1 power supply into the A.C. source

5. Attach twist lock power connection from V-PS12-5V-1 power supply to the back of the unit.

6. Turn on the V-R82DP-HDSDI by depressing the power switch located on the front of the unit.

Connectors

* Tally lamps active when connected to ground

Monitor 2

HDSDI In

Channel 1 and 2

12 VDC from

V-PS12-5V-1 power

supply

Left Pin - Pos

Right Pin- Neg

Pin1-M2Yel

Pin2-M2Red

Pin3-M2Grn

Pin4-

Pin5-Gnd

Pin6-

Pin7-

Pin8-

Pin9-

Pin10-

Pin11-M1Yel

Pin12-M1Red

Pin13-M1Grn

Pin14-

Pin15-Gnd

Tally IN

DB-15 Female

Digital Screen Formats and Frame Rates

Monitor 1

HDSDI In

Channel 1 and 2