Marshall Electronics V-R842DP-AFHD High Definition Dual Screen LCD Monitor Set Marshall Electronics, Inc. 1910 East Maple Ave. El Segundo, CA 90245 Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688 www.LCDRacks.com • sales@lcdracks.
19
Warranty Contents Marshall Electronics warranties to the first consumer that this V-R842DP-AFHD LCD monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty.
Specifications (continued) Product Overview The V-R842DP-AFHD is a dual screen high definition LCD monitor set featuring our completely digital TFTMegaPixel™ active matrix LCD platform. Utilizing 8.4-inch panels with 2.4 million pixels each, the V-R842DP-AFHD provides the highest pixel density available while occupying only 4RU.
Specifications ■ PANEL ■ TALLY Screen Size Display Area (h x v) Aspect Ratio Pixels Color Depth Viewing Angle (h x v) Brightness Contrast Ratio Dot Pitch (h x v) Pixel Pitch (h x v) 8.4” Diagonal 170.469 x 127.872 mm 4:3 Native (4:3/16:9 Modes) 1024 x RGB x 768 24-bit (16,777,216 Colors) 170° x 170° 2 400 cd/m 400:1 0.0555 x 0.1665 mm 0.1665 x 0.
On-Screen Menu (continued) Front Panel Features SYSTEM CONFIGURATION SUBMENU 6 Top Front Panel Video Configuration Submenu ■ Internal SMPTE Color Bars Use to display internally generated SMPTE split-field color bars. Lower Front Panel 1 2 1 Power Button Turn the monitor on by pressing the power button. In the OFF state, the LED will shine red. The LED will shine green when the monitor is turned on.
On-Screen Menu (continued) Rear Panel Features VIDEO CONFIGURATION SUBMENU (continued) ■ Aspect Ratio Settings Use to switch between 4:3 and 16:9 aspect ratios. 1 3 As the V-R842DP-AFHD monitor has a native resolution of 1024 x 768 RGB pixels, incoming images are automatically scaled to fit the screen: • In 4:3 mode, images are scaled up or down to fill the entire 4:3 screen (1024 x 768).
On-Screen Menu (continued) Compatible Input Formats VIDEO CONFIGURATION SUBMENU (continued) Format 8 Composite S-Video NTSC ● ● PAL ● ● YPbPr SDI VGA DVI-D ■ Monochrome Mode Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale picture. 525i ● ● ● 625i ● ● ● 486p / 59.94 ● ● 576p / 50 ● ● ■ Blue-Only Mode 1035i / 60 ● Use this setting to enable Blue-Only mode.
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU On-Screen Menu STRUCTURE OVERVIEW MARKER SETUP MARKER 16:9 OFF, 13:9, 14:9, 4:3, 2.35:1, 1.
On-Screen Menu (continued) MARKER SETUP SUBMENU On-Screen Menu (continued) MARKER SETUP SUBMENU (continued) ■ 4:3 Markers Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the aspect ratio is set to 16:9, or when Pixel-to-Pixel, Underscan, or H/V Delay is enabled.