Broadcast A / V Division M-LYNX-702 V.
Table of Contents Table of Contents 01 1. Package Includes 02 2. Product Description 02 2.1 Front Panel 02 2.2 Rear Panel Connections 03 3. On-Screen Menu 04 3.1 Main Menu Categories 04 3.2 Sub-Menu Descriptions 04 3.2.1 Video 06 3.2.2 Audio 07 3.2.3 Setting 07 3.2.4 OSD (On-Screen Display) 08 4. Dimensions 09 5. Parameters 10 6.
M-LYNX-702 V.3 Manual 1. Package Includes • • • • One M-LYNX-702 Monitor One universal AC power adapter One AC power cord Information card 2. Product Description 2.1 Front Panel Headphone jack (one per screen). Monitor channels 1 and 2 of embedded audio from HDMI or SDI source. RATIO: Aspect ratio button provides quick selection of Full Screen, 16:9, and 4:3. INPUT: HDMI/SDI button switches between HDMI or SDI inputs. MENU: Accesses the on-screen menus.
2.2 Rear Panel Connections Power Input The M-LYNX-702 V.3 monitor can be powered using either the included 12-Volt power supply plugged into the small coaxial connector or standard 12-Volt camera-type power supply connected to the 4-pin XLR connector. It is recommended to connect only one type of power supply at one time. USB Port The USB port is used for service functions only. HDMI Input and Loop Out Connect a standard HDMI source here. For details, see the Compatible Input Formats section below.
M-LYNX-702 V.3 Manual LAN Port Ethernet LAN “RJ-45” Connector. The monitor can be operated from a PC using the application provided with the unit. 3. On Screen Menu Access the main menu by pressing the Menu button on the front panel. Use the / keys to move within the main menu. Use the key to access a sub-menu. Once in a sub-menu, use the / keys to select an item to adjust and use the / keys to change values or choices within their range.
Audio – Volume, Balance. Setting – Screen Markers, Center Marker, Image Flip, Language, Reset, IP, Com, Ver. OSD – Setup On-Screen Menu Display. Has selections for Horizontal Position, Vertical Position, Menu Transparency, Menu Timeout, and display of Input Format.
M-LYNX-702 V.3 Manual 3.2 Sub-Menu Descriptions The default settings shown are the values the unit comes with “out-of-the-box.” In most cases, these are the mid-range settings for a given function and are not intended to be used as “ideal” values or choices. Best settings will depend on the application. 3.2.
Check Field (Off = Default) Off Mono • • Red Green Blue • • • Default Picture will be displayed as black & white, all other color information is removed Only red color information is displayed Only green color information is displayed Only blue color information is displayed H/V Delay (Only available on SDI signal. Off = Default) • • • • Off H/V delay V delay H delay Scan Mode Standard Overscan Underscan • • • Normal picture size Expands picture by 5% Shrinks picture by 5% 3.2.
M-LYNX-702 V.
4.
M-LYNX-702 V.3 Manual 5. Parameters Screen Screen Resolution Dot pitch Ratio Brightness Contrast Response Time Back light View angle Input Output Control SDI input formats HDMI input formats Power consumption Voltage Operating current Work temperature Store temperature Size Weight 7” screen x 2 1280 x 800 0.117 (H) x 0.117 (V) 16:10 400 cd/m2 800:1 14ms LED 89°/89°, 89°/89° (L/R,U/D) HDMI-IN, SDI-IN per screen HDMI-OUT, SDI-OUT per screen Ethernet SD: 480i 59.94 / 576i 50 HD: 720p 25, 29.97, 30, 50, 59.
6. Network Control Please download related Windows application from the Marshall website at: http://www.lcdracks.com/monitors/LYNX/M-LYNX-702.php 1. On the monitor, select Menu/Setting and read the IP address. Note: It is best to connect to the network first then connect power supply. In this way, the monitor will correctly display the IP information. (See Menu/Setting screen below.) • Open the application you have downloaded, Then, Input: User / Password, Click Log In.
M-LYNX-702 V.3 Manual • After login, Click: Add monitors. 2. Input IP address shown in the monitor Menu under “Setting” option, then click connect. www.marshall-usa.
13 • Select Screen 1 (left) or Screen 2 (right). • Then, select Control to operate basic menu settings.
M-LYNX-702 V.3 Manual • Or, select Function then click on the desired choices. The monitor will immediately respond. www.marshall-usa.
Warranty Marshall Electronics warranties to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of two years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above.