User Manual

8
M-LYNX-702 V.3 Manual
www.marshall-usa.com
Displays a red “+”mark on the screen to indicate the center position
• OFF
• ON
• OFF
• V - Flips the image vertically
• H - Flips the image horizontally
• V/H - Simultaneously flips the image vertically and horizontally
Select language used for the on-screen menus
• English
• Español
Selecting Reset will produce this message: Reset function values?: Yes / No
Press / keys to select “Yes” or “No” and press the front panel “MENU” key to confirm the
selection. Selecting “Yes” will reset the monitor back to factory default values and choices.
Center Marker (OFF = Default)
Image Flip (OFF = Default)
Language (English = Default)
Reset
Displays the monitor default IP address: 192. 168. 0. 8 when monitor is not connected to network.
Displays IP address assigned by DHCP enabled server or router when monitor is connected to
network.
“Com: 1” is screen 1, “Com: 2” is screen 2.
IP: 0. 0. 0. 0
Com: 1 or 2
Ver: Firmware version.
OSD Horizontal Position (0 – 100, 50 = default)
OSD Vertical Position (0 – 100, 50 = default)
Menu Transparency (0 – 10, 1 = default)
OSD Timeout (5s / 10s / 15s / 60s, 10s = default)
• Moves Menu Display Horizontally
• Moves Menu Display Vertically
• Darken or Lighten the background
behind the menus
• The input video format will be
displayed for the selected number of
seconds whenever the input source
is changed
3.2.4 OSD (On-Screen Display)