Manual

Page 25 of 39
MARKER CONFIGURATION SUBMENU
Marker:
Use this setting to enable or disable all on-screen
markers. This setting affects the Center marker,
Aspect markers, and Safety marker.
Center Marker:
Use this setting to display a center marker on the
screen.
Aspect Markers:
Use these settings to superimpose one of 6 markers on the screen when in 16:9 mode.
 4:3
 16:9
 1.85:1
 2.35:1
 4:3 and 1.85:1
 4:3 and 2.35:1
Safety Marker:
Use this setting to adjust the safety marker from 80% to 100% (Off) in 1% steps and
USER.
 User Marker
 Selecting USER will display the last defined user configured marker when Marker
is ON.
To configure a user marker, you must have User Marker assigned to one of the
seven Function Keys
1. Press the assigned Function key to display the User Marker.
a. You will see prompts in the upper left corner of the screen.
b. If no action is taken within 5 seconds the prompt will disappear and no
modifications can be made.
2. The prompts will ask you to make size and placement adjustments in the following order:
a. Width X
b. Height Y
c. Move X (left or right)
d. Move Y (up or down)
3. You can use any of the four rotary encoders to make these adjustments.
4. When the User Marker is in the proper location simply stop making any changes and the
prompts will disappear after 5 seconds.
Cross Hatch:
Uses this to select one of the following grid patterns:
 OFF
 SMALL
 MEDIUM
 LARGE
Marker Mat:
Use this setting to change the format of the marker curtains between Clear, Halftone, or
Black.
Line Thickness:
Use this setting to choose the line thickness of the markers from 1, 2, or 3 pixels thick.
Line Type:
Use this setting to select the style of line used for markers between White, Halftone, and
Invert.