User Manual

Warranty
Marshall Electronics warranties to the first consumer that this OR-901-3GSDI LCD monitor will, under normal use, be free from
defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof
of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above.
Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics.
Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. It is considered normal for a
minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing area. Marshall Electronics re-
serves the option to refuse service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.
No sales personnel of the seller or any other person is authorized to make any warranties other than those described above, or to
extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant
effort to improve products and product features, specifications may change without notice
Marshall Electronics, Inc.
1910 East Maple Ave.
El Segundo, CA 90245
Tel: [phone] • Fax: [phone]
www.LCDRacks.com • [e-mail]
OR-901-3GSDI Quick Start Guide
Marshall Electronics
It is impossible review all of the functions of the OR-901-3GSDI in this quick start document. Below is a
brief description of a few of the features.
User Marker:
This is for marking a particular area of the screen where a logo or titles may appear.
• In the main menu all marker selections must be OFF except for user marker.
• User Marker must be assigned to a Function Key.
• When selected follow screen prompts to adjust size and location.
G-Marker:
This will display a grid generated by the internal gyroscope as a “Monitor Level Assist”.
• Pressing the corresponding Function Key will turn the G-Marker ON and OFF.
• To calibrate the G-Marker to a known attitude, Press and HOLD the corresponding Function Key.
3-D Monitor Functions:
The Orchid OR-901-3GSDI includes several modes to assist the camera operator during 3-D production.
• The 3-D function requires a Single Link SBSH (Side by Side Half) formatted input.
• Anaglyph RED / CYAN glasses (model GL-ARC) are required to view 3-D Anaglyph images.
• There are five 3-D Review modes available from the SCREEN menu:
1. LEFT EYE
2. RIGHT EYE
3. BLENDING
4. LUMINANCE DIFFERENCE
5. CHROMA DIFFERENCE
• There are Four Anaglyph 3-D viewing modes available from the SCREEN menu:
1. COLOR
2. HALF COLOR,
3. OPTIMIZED,
4. GRAY
Operating Notes
Marshall Electronics
OR-901-3GSDI
9” Camera Assist Field Monitor with Waveform, Vector Scope, Audio Meters, Audio Phase Display
And 3-D production modes
Quick Start Guide