User Manual
OR-901-3GSDI Quick Start Guide
Marshall Electronics
For complete instructions, visit Marshall Electronics at www.lcdracks.com
Product Overview
The OR-901-3GSDI is a full featured camera top and field LCD monitor with dual 3G-SDI inputs. The
OR-901-3GSDI has multiple analysis utilities such as Waveform Monitor, Vector Scope, Audio Level
Meters and Audio Phase display to assist the videographer without the expense of multiple test instru-
ments. Additionally the OR-901-3GSDI includes multiple modes to assist in the production of 3D con-
tent. The 960 x 540 resolution panel was chosen to allow monitoring of HD 1920 x 1080 video formats
without scaling artifacts. The OR-901-3GSDI comes with a large external tally when used in view finder
applications. The Light weight and slim profile provide great portability and ease of use.
Installation and Accessories
Carefully unpack the OR-901-3GSDI and verify that the following items are present:
• OR-901-3GSDI with attached stand and top carrying handle
• 12 volt AC/DC Power adaptor
• Regional power cord
• Quick Start Guide
• Spare “On Air” tally
• 1 pair GL-ARC 3-D glasses
4-pin XLR connector
-. PIN 1: GND
-. PIN 2: N.C.
-. PIN 3: N.C.
-. PIN 4: +12VDC
14.4V (Anton Bauer-Mount),
7.2V (Small battery mount).
Operating voltage 7~30VDC
OR-901-3GSDI Front — Overview
1 2 3 4 5
1. 3.5mm Headphone Jack
2. Speaker
3. User Assign Function Keys (9)
4. Roto Menu and Variable Level control
5. Power Switch and Indicator
Rotary Knob Assignable Functions
BRIGHT SHARPNESS
CONTRAST VOLUME
SATURATION PEAKING
F Key Default Function
1
INPUT 1
2
INPUT 2
3
SCAN
4
ASPECT
5
MARKER
6
ZOOM
7
WAVEFORM
8
VECTOR SCOPE
9
AUDIO LEVEL METERS
Note: When not in Menu mode pressing
the Rotary knob will select between the six
Rotary Functions.
OR-901-3GSDI Quick Start Guide
Marshall Electronics
OR-901-3GSDI Rear — Overview
1
2
3
4
5
6
7
8
9
1. 4-Pin XLR male Power Connector
2. Parallel Remote Connector (RJ-45 User Assignable Functions)
3. 3.5mm Stereo Line Output Jack
4. 3G/SD/HD-SDI Inputs (BNC)
5. Re-clocked 3G/SD/HD-SDI Output (BNC)
6. On Line Tally OFF / DIM / ON Switch
7. On Line Tally Indictor Storage Area
8. External Battery Connector (for use with optional battery mounts)
9. Service Port (for use with optional OR-SM service module to upgrade firmware
and perform color calibration)
Pin 1 Pin 8
Remote pin assign
Notes: 1. Internally pulled up with resister
2. Fixed as Ground
PIN DEFAULT NOTE
1 RED TALLY 1
2 GREEN TALLY 1
3 BLUE TALLY 1
4 MARKER 1
5 GROUND 2
6 INPUT 1 1
7 INPUT 2 1
8 ASPECT 1
Function Keys
F-1 Through F-9 Available User Functions
INPUT 1 ASPECT AUDIO PRESET 4 WAVEFORM MON
INPUT 2 ZOOM AUDIO PRESET 5 VECTORSCOPE
GAMMA 1.0 HV DELAY AUDIO PRESET 6 CLIPGUIDE
GAMMA 1.8 MARKER AUDIO PRESET 7 TIMECODE
GAMMA 2.0 USER MARKER AUDIO PRESET 8 HISTOGRAM
GAMMA 2.2 G-MARKER AUDIO MUTE FALSE COLOR TG
GAMMA 2.4 AUDIO METER LAYOUT WFM FALSE COLOR MTF
GAMMA 2.6 AUDIO PEAK LOG LAYOUT WAV PEAKING COLOR
WHITEBALANCE D65 AUDIO MONITOR LAYOUT VS 3D REVIEW
WHITEBALANCE D93 AUDIO PRESET 1 LAYOUTALM 16 ANAGLYPH
MONO AUDIO PRESET 2 LAYOUT QUAD PEAKING COLOR
COLOR CHANNEL AUDIO PRESET 3 LAYOUT QUAD 2 FAN STOP
SCAN