User Manual

System Configuration Submenu

Use the System Configuration submenu to control various system parameters such as GPI, function button settings and

User definable presets.

■ Green, Red and Yellow GPI

Use the Green, Red and Yellow GPI menu items to set a certain action when the Green, Red or Yellow tally connector is

activated through dry contact on the tally connector on the back of the unit. The following options are available for each

input:

•Tally Activate the Green, Red or Yellow On Screen Tally

•Monochrome Activate Monochrome mode

•Blue Only Active Blue Only mode

•Pixel to Pixel Activate Pixel to Pixel

•Anc. Monitor Activate the Ancillary data monitor

•OSD Tally Activate the OSD Tally

•IMD State Activate IMD Text Strings on the screen

•CTemp / Gamma Toggle through the different CTemp settings

•Layout Toggle through the available screen Layouts

•Aspect Ratio Toggle through the available Aspect Ratios

•Anc. Timecode Toggle through the Ancillary Timecode options

•Marker Level Toggle through the available Marker background options

•Monochrome (L) Activate the Monochrome function when the Tally pin is set to LOW (dry contact)

•Markers (L) Toggle through the available Markers when the Tally pin is set to LOW (dry contact)

•Marker Mask 50% (L) Activate the 50% Marker Mask when the Tally pin is set to LOW (dry contact)

•Marker Mask Black (L) Activate the Black Marker Mask when the Tally pin is set to LOW (dry contact)

•Marker Center (L) Activate the Center Marker when the Tally pin is set to LOW (dry contact)

System Configuration Submenu