User Manual

22
■
Left Ch. Select
Use this setting to select which of the 16 possible channels you would like to monitor on the Left side of the stereo output.
■
Right Ch. Select
Use this setting to select which of the 16 possible channels you would like to monitor on the Right side of the stereo output.
■
Mute
The Mute function disables audio output from Headphone output on the monitor. This will NOT control the Line Out level of the
monitor, only the Headphone output.
■
Volume
The Volume control determines the output level for the Headphone out on the monitor. This will NOT control the Line Out level
of the monitor, only the Headphone output.
■
Audio Delay
The Audio Delay function applies a delay to the Audio Metering and audio output. Use the function to select a delay between
000 and 015 (in terms of fields, or frames if the signal is progressive).
IMD Config Submenu
The QVW-1708-Q features an In-Monitor Display (IMD) with the ability to display on-screen text and tally in three colors.
IMD text, color, and alignment can be assigned to each input locally using menu options (see below).
Alternately, IMD text and tally can be remotely controlled via the RS-422/485 serial interface using several industry-
standard protocols, including TSL v4.0 and Image Video. Multiple QVW-1708-Q monitors can be looped together and
each addressed individually via the protocol. All menu features of the QVW-1708-Q can also be controlled via the
embedded MEI Remote page.
Use the IMD Configuration submenu to configure various IMD parameters as described below. IMD State can be enabled
/ disabled through the OSD Config submenu.
IMD Configuration Submenu