Marshall Electronics Model No.
Product Overview.................................................................................................................................................................. 4 Features ................................................................................................................................................................................. 4 Installation and Initial Setup ...............................................................................................................
Product Overview The V-LCD51 5" monitor is packed with features found in more expensive models. This compact LED-backlit confidence monitor offers amazing picture performance and excellent viewing angles for users simply looking for a portable, yet versatile monitoring solution. The V-LCD51 offers standard features including a wide variety of formats and markers, 4 user-configurable front panel function buttons, RGB Check Field / Field Detect, RGB gain and bias control.
Installation and Initial Setup ■ Unpacking Carefully unpack the V-LCD51 monitor and verify that the following items are included: • V-LCD51 Monitor • V-PA5V-2.0A-XX Power Supply • Hot Shoe Adaptor • Operating Instructions on CD Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, immediately call Marshall Electronics Customer Service at (800) 800-6608. If you are not located within the continental United States, call +1 (310) 333-0606.
Front Monitor Features User-Definable Function Buttons Four user-definable function buttons can be used for direct access to various settings. Functions are assigned using the on-screen menu. Menu Navigation Buttons Use the Menu, ▲, ▼, and Select buttons to display and navigate the on-screen menu. Image Adjustment Buttons Use the image adjustment buttons to adjust brightness, color saturation, and contrast of the image.
Rear Monitor Features HDMI Input The V-LCD51 has a single HDMI input. Signal formats and frame rates are automatically detected and displayed on the screen. Power Switch Use the hard power switch to supply power to the monitor. The power switch draws power from either the 5 VDC input or the battery compartment. If both power inputs are live, the monitor will draw power from the 5 VDC input to preserve battery life.
Compatible Input Formats The following standards are supported by the V-LCD51 monitors: HDMI Video– 720p (60 / 59.94 / 50 / 30 / 29.97 / 25) 1080i (60 / 59.94 / 50) 1080p (30 / 29.97/ 25 / 24 / 24sF/ 23.98 / 23.
On Screen Menu Video Configuration Color Temperature D65, D55, Linear, User, D93 RGB Bias and Gain R, G, B Bias (0-100) / R, G, B Gain (0-100) Check Field Off, Mono, Blue, Green, Red Ratio Full Screen, 4:3, 16:9 Pixel-to-Pixel Off, On Marker Enable Off, On Center Marker Off, On 16:9 Markers Off, 4:3, 13:9, 14:9, 1.85:1, 2.
MAIN MENU AND NAVIGATION Main Menu Access the main menu by pushing and holding the MENU button on the front panel of the monitor. •Step through menu items using the ▲ and ▼ buttons. •Choose a submenu or select a menu item by pressing SELECT. •Return to the previous menu by pressing MENU. •Exit the main menu by pressing MENU. The menu will automatically time out after 15 seconds.
■ RGB Bias and Gain Select this submenu to fine-tune the monitor’s color balance (R, G, B). This should only be done by someone experienced with video engineering, as this will alter the overall color shading of the screen. The purpose is to allow color matching to other types of monitors and/or displays. Note: The Color Temperature preset will automatically switch to USER when Color Bias settings are adjusted. It is normal for color bias adjustments to be very subtle.
6. Disable Monochrome mode. 7. Enable Blue Check Field mode and adjust the Color knob so that the outermost bars (white and blue) appear to match in brightness. 8. Disable Blue Check Field mode. ■ Ratio Use to switch between Full Screen, 4:3 and 16:9 aspect ratios. As the V-LCD51-HDA monitor has a native resolution of 800 x 480 RGB pixels, incoming images are automatically scaled to fit the screen: • In Full Screen mode, images are scaled to fill the entire screen (800 x 480).
MARKER CONFIGURATION SUBMENU Marker Configuration Submenu ■ Markers Use this setting to enable or disable all on-screen markers. This setting affects the center marker, full screen markers, 16:9 markers and 4:3 markers. Center Marker Use this setting to display a center marker on the screen. ■ 16:9 Markers Use these settings to superimpose one of 12 markers on the screen when in 16:9 mode. This setting is disabled when the aspect ratio is in Full Screen or 4:3 mode.
■ Full Screen Markers Use this setting to superimpose one of 7 markers on the screen when in Full Screen mode. This setting is disabled when the aspect ratio is set to 16:9 or 4:3. • • • • • • 95% Safe Area 93% Safe Area 90% Safe Area 88% Safe Area 85% Safe Area 80% Safe Area Full Screen Marker Examples: OFF (No Marker) 90% Safe Area ■ 4:3 Markers Use this setting to superimpose one of 7 markers on the screen when in 4:3 mode.
FILTER CONFIGURATION SUBMENU ■ False Colors The V-LCD51 has a false color filter to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external equipment. To best utilize this feature, you must understand the color chart below and have a basic understanding of camera exposure.
■ Peaking Filter (Focus assist) The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, all color will be removed from the display and a black-and-white image will remain. The internal processor will display RED color on the screen where sharp edges appear. When the camera operator adjusts (racks) the focus control (on the camera lens), different parts of the image will have RED colored edges.
■ Freeze Input Use the Freeze function to “freeze” the current image on the screen. Select this menu item again (Unfreeze) to return to the real-time video input. ■ Image Flip Use the Image Flip function to turn the monitor’s display 180°. Note: Both the image and all menus and On Screen Display text will be flipped. ■ Manufacturer Default Select this menu item to reset all adjustments and menu settings to the factory default configuration.
SYSTEM INFORMATION SUBMENU System Information System \ vx.xx ■ System This shows the System firmware version of your monitor.
Specifications ■ PANEL Screen Size Display Area (h x v) Native Aspect Ratio Pixels Viewing Angle (h x v) Brightness Contrast Ratio Pixel Pitch (h x v) 5.0” Diagonal 108.0 x 64.8 mm 15:9 800 x 480 85° x 85° 2 300 cd/m 600:1 0.135 x 0.135 mm ■ VIDEO INPUT/OUTPUT HDMI Input HDMI 1.2, VESA Graphics Modes ■ MECHANICAL Dimensions (w x h x d): 4.86” x 4.40” x 1.84” Additional Mounting: ¼”-20 Mounting Bracket Weight (Monitor Only): .
Dimensions 20
Maintenance ■ Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean microfiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended.
Marshall Electronics, Inc. 1910 East Maple Ave. El Segundo, CA 90245 Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688 www.LCDRacks.com • sales@lcdracks.