Operating instructions

4
Front Panel Features
Power Button
Use the power button to toggle between ON and
STANDBY modes. In both the STANDBY and the
ON state, the LED on the button will illuminate bright
green. This indicates that MAINS power is applied to
the unit.
Input Select Buttons
Use the VIDEO, YPbPr, and S1/S2 buttons to select
the corresponding analog or digital input. Video
standards (NTSC/PAL, etc.) are automatically
detected. S1/S2 select inputs connected to Optional
Input Modules (located in Slot-1 or Slot-2).
User-Definable Function Buttons
Four user-definable function buttons can be used for
direct access to various settings. Functions are
assigned using the on-screen menu (Function
Presets – Page 21).
Menu Navigation Buttons
Use the Menu, ▲, ▼, and Select buttons to display
and navigate the on-screen menu (See Main Menu
and Navigation – Page 12).
Image Adjustment Knobs
Use the image adjustment knobs to adjust color
brightness, color-saturation, tint, and contrast of the
image. The status of each image adjustment
parameter is shown on the bottom left of the screen,
with values ranging from 0 to 100. Default value is
50.
LED Tally
Three LED tally lights (yellow, red, green) are
available above the screen. Each tally light can be
controlled independently from the rear Tally
Connector. (See Tally Hardware Interface, Page
22.)