Operating instructions

23
■
Remote Enable
Use this setting to allow the monitor to be controlled by other monitors on a V-MD Network. Choose Global to allow access
from any monitor or choose Own Webpage Only to only allow the monitor’s web page to control the monitor.
■
Configuration Mode
Use this setting to choose between a DHCP IP address retrieval and Manual IP address selection.
■
IP Address
When using a Manual Configuration Mode, use this field to assign a specific IP address for your monitor. When in DHCP
Configuration Mode, this field will automatically be filled by the IP address assigned by your network.
■
Subnet Mask
When using a Manual Configuration Mode, use this field to assign a specific Subnet Mask for your monitor. When in DHCP
Configuration Mode, this field will automatically be filled by the Subnet Mask assigned by your network.
■
Default Gateway
When using a Manual Configuration Mode, use this field to assign a specific Default Gateway for your monitor. When in
DHCP Configuration Mode, this field will automatically be filled by the Default Gateway assigned by your network.
■
Host Name
Use this field to enter a Host Name for your monitor. You may choose up to 16 alphanumeric characters for the host name.
■
Web Authentication
Use this field to turn Web Authentication ON or OFF. If turned on, you will be asked to select a Username and Password in
the subsequent fields.
Username:15 Alphanumeric character string
Password: 15 Alphanumeric character string
■
MAC Address
This field will show the MAC address associated with the particular monitor in question.