User Manual

3- System Operation
__________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3 Page 14 of 64 5/7/12
3.1 Remote Video Monitoring
There are two ways to monitor video when the Center System and Video Server are
connected. In order for a proper operation, an IP Address must be set accordingly.
Please refer to the VS Manager Manual enclosed with product for further details.
Default ID: admin Default Password: 1234
Video Monitoring with Decoder System
Once the Encoder IP Address is set in the Remote IP Address section of the Decoder,
the Decoder System will connect to the Encoder System and start receiving the video
images. Normally, a monitor connected to the Decoder will display video images.
Video Monitoring using Internet Explorer
If the Video Server’s IP Address is entered on Internet Explorer, the system will ask for
confirmation to install Active-X Control. Once authorized, Internet Explorer will start to
display video images from the Encoder as shown below:
Default IP Address : http://192.168.10.100