User Manual

4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3 Page 26 of 64 5/7/12
Burn In OSD
Insert System ID and Date/Time in the Compressed Video. System ID and Time
respectively can be turned on or off in the video. Position and Font size can be
configured also. System ID for Burn In OSD exists independently from the Normal
System ID. The size of the Burn In OSD display varies according to the encoding
resolution setting. This is inevitable because the Burn In OSD is inserted to the frames
before encoding is performed. The following table describes the rule for Burn In OSD
Display:
Resolution Small
(8x8)
Middle
(16x16)
Large
(32x32)
352x480 / 352x240 / 352x576 /
352x288
2 1 0
720x480 / 720x240 / 720x576 /
720x288 / 640x480 / 800x600
2 2 1
1024x768 / 1280x720 / 1280x960 /
1280x1024 / 1440x900 / 1600x900/
1680x1050 / 1920x1056 / 1920x1080 /
2048x1536 / 2560x1600 / 2592x1936
2 2 2
2: Both System ID and Time are displayed.
1: Either System ID or Time can be displayed. When both are enabled, the System ID
is displayed.
0: No items are displayed. This is because video area is too small to display OSD text
in large size.
Output Format
Output Format Menu appears only when Enable Preview is ON. Select the output
format for the monitor preview according to the video output and monitor specification.